×
Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
Giving the Jimny a birthday
Less
More
- Posts: 1936
- Thank you received: 554
- Points: 7523.00
-
10 Mar 2021 17:52 #233622
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Giving the Jimny a birthday
More great progress my friend!
Seeing this makes me wish I had taken the body right off like you have, but I dont have the luxury of the lift. Looks so much easier to get at the nasty tinworm how you are doing it. No doubt much more effective too. You should have an ever lasting jimny after all this![:laugh: :laugh:](/media/kunena/emoticons/laughing.png)
p.s. Glad to hear that gearbox is still doing well. It cost a fortune to have it out and rebuilt when I had it, so it should be reliable now. Worth giving the intermediate prop the once over at the gearbox end while its easy to get at. The cap is known to leak the oil out, causing problems inevitably. Can be cleaned up as sealed again with resin glue I believe
Seeing this makes me wish I had taken the body right off like you have, but I dont have the luxury of the lift. Looks so much easier to get at the nasty tinworm how you are doing it. No doubt much more effective too. You should have an ever lasting jimny after all this
![:laugh: :laugh:](/media/kunena/emoticons/laughing.png)
p.s. Glad to hear that gearbox is still doing well. It cost a fortune to have it out and rebuilt when I had it, so it should be reliable now. Worth giving the intermediate prop the once over at the gearbox end while its easy to get at. The cap is known to leak the oil out, causing problems inevitably. Can be cleaned up as sealed again with resin glue I believe
![;-) ;-)](/media/kunena/emoticons/wink.png)
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
10 Mar 2021 21:35 #233632
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Thanks Riccy,
Before the garage and lift became available, I was even considering building some weird wooden lift to get the body off in my drive
. Not only would the neighbours hate me for having bits of broken car on my driveway, they'd have been wondering why I was building a gallows. The lift has been a life saver, wouldn't have been able to do any of this without it.
I'll have a look at the intermediate prop. I've not done anything with that so far. I'll be cracking on with as much welding as I can as I've only got a week left in the garage, so I'll have to have it back in one piece (at least rolling) before next Wednesday. A few late nights ahead for me I think.
Before the garage and lift became available, I was even considering building some weird wooden lift to get the body off in my drive
![:D :D](/media/kunena/emoticons/laughing.png)
I'll have a look at the intermediate prop. I've not done anything with that so far. I'll be cracking on with as much welding as I can as I've only got a week left in the garage, so I'll have to have it back in one piece (at least rolling) before next Wednesday. A few late nights ahead for me I think.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
10 Mar 2021 22:01 - 10 Mar 2021 22:03 #233633
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Wednesday 10th March,
Jobs done:
Today was the day I've not been looking forwards to. Before I split the jimny, I'd hired someone to do the welding, but he let me down and only turned up twice in over two months, doing what I'd equate to two days work. This meant that if anyone was going to do it, it would have to be me. However, this has more plusses than minuses as I'm now able to weld, at least for my own work (I certainly couldn't charge anyone) and I'm now quite happy cutting out and bending panels to fit spaces.
As you can see in the pictures, there's so much orange dust in there, you'd think these were snaps taken by the Mars rover. So much rust in so many places. Think I have my work cut out for me.
Jobs for tomorrow:
Think once I get the rear arch area done, I'll have a good base for putting in the boot floor panel. Although, I don't think I'll get all of that completed in one day.
I'll have to relocate the lifting pads for the car lift so that I can get to the last bolts for the front panels. That way, I can get a look at how I can approach the slam panel and also decide how I'm going to brace it.
Jobs done:
- hammered round all the hotspots on the body to see where all the patching need to be done
- wire wheeled a few areas to see how far back the wafer thin metal went until MOT strength steel appeared. At least the remaining body mounts are good and solid. (front two behind the slam panel were repaired for me already)
- Welded the remaining 3/4 of the port sil till I hit the rear arch area
- removed most of the bolts for the front two wing panels (couldn't remove them as access to the bottom bolts were obscured by the car lift rubber lifting points
- Cut out a chunk of sil just before the rear arch
- cut and fitted a piece to fill the hole. Decided to weld this tomorrow as it was getting late and I have a lot to do in the port rear arch
Today was the day I've not been looking forwards to. Before I split the jimny, I'd hired someone to do the welding, but he let me down and only turned up twice in over two months, doing what I'd equate to two days work. This meant that if anyone was going to do it, it would have to be me. However, this has more plusses than minuses as I'm now able to weld, at least for my own work (I certainly couldn't charge anyone) and I'm now quite happy cutting out and bending panels to fit spaces.
As you can see in the pictures, there's so much orange dust in there, you'd think these were snaps taken by the Mars rover. So much rust in so many places. Think I have my work cut out for me.
Jobs for tomorrow:
Think once I get the rear arch area done, I'll have a good base for putting in the boot floor panel. Although, I don't think I'll get all of that completed in one day.
I'll have to relocate the lifting pads for the car lift so that I can get to the last bolts for the front panels. That way, I can get a look at how I can approach the slam panel and also decide how I'm going to brace it.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Last edit: 10 Mar 2021 22:03 by Mike G.
The following user(s) said Thank You: Soeley
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8953
- Thank you received: 1795
- Points: 37154.00
-
11 Mar 2021 04:25 #233636
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Giving the Jimny a birthday
That's going to keep you busy. Just think about the end result, it'll be over quicker that way.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
11 Mar 2021 21:27 #233665
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Definitely Lambert. I'm throwing as much time at it as possible. At least I'm not discovering more work now, I'm on the home straight.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
11 Mar 2021 21:45 #233666
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Thursday 11th March,
Work done today:
My por15 paint arrived today along with my brake caliper paint., but I don't have enough time in the shed to do that stuff right now. There will be a lot of little jobs that I can get on with when the car is back on my driveway.
Tomorrows jobs:
hopefully will get the back end welding all done. If so, I'll clean up all the welds and buff off the old underseal so that when it comes to coating, it will get a decent hold. I have some QD primer, so will give it all a coat (after seam sealing the welds) as soon as possible so that the rust doesn't get a chance to set in. Bit optimistic, as I'll probably still be messing about welding by the end of play tomorrow.
Work done today:
- finished port sil welding
- finished port wheel arch welding beside sil
- cut out boot floor
- marked out areas to cut out on wheel arches
- cut out stencils for both wheel arches
- cut out metal from stencils for wheel arches
- looked out some metal to brace the front of the vehicle to keep it square when doing the slam panel
My por15 paint arrived today along with my brake caliper paint., but I don't have enough time in the shed to do that stuff right now. There will be a lot of little jobs that I can get on with when the car is back on my driveway.
Tomorrows jobs:
hopefully will get the back end welding all done. If so, I'll clean up all the welds and buff off the old underseal so that when it comes to coating, it will get a decent hold. I have some QD primer, so will give it all a coat (after seam sealing the welds) as soon as possible so that the rust doesn't get a chance to set in. Bit optimistic, as I'll probably still be messing about welding by the end of play tomorrow.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
The following user(s) said Thank You: Riccy
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
12 Mar 2021 23:45 #233696
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Friday 12th March,
Jobs done
This leaves the boot floor and slam panel as the only welding needing done. Hopefully I can get these done this weekend and start prepping to get the paint on before next week starts. Pulled 12 hours in the shed today and only stopped because the extension lead I was using blew out the power. The fusebox uses fusewire, so couldn't just reset it. As it was 2200, I decided I might as well go home for the night.
Jobs tomorrow:
Get more cutting discs for the grinder
Dive into more welding and get as much done as possible
Think about what needs seam sealed, prep some areas and decide what coatings I'm going to use under the stonechip.
Jobs done
- reinforced rear body mount areas with new metal
- also welded metal to rear of arches area
- welded in plates on rear of both seat pans
- test fitted new boot floor
This leaves the boot floor and slam panel as the only welding needing done. Hopefully I can get these done this weekend and start prepping to get the paint on before next week starts. Pulled 12 hours in the shed today and only stopped because the extension lead I was using blew out the power. The fusebox uses fusewire, so couldn't just reset it. As it was 2200, I decided I might as well go home for the night.
Jobs tomorrow:
Get more cutting discs for the grinder
Dive into more welding and get as much done as possible
Think about what needs seam sealed, prep some areas and decide what coatings I'm going to use under the stonechip.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
- Roger Fairclough
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1457
- Thank you received: 210
- Points: 7885.00
13 Mar 2021 10:22 #233704
by Roger Fairclough
Replied by Roger Fairclough on topic Giving the Jimny a birthday
I used to have an MoT testers certificate and I would have no hesitation in passing your welds.
Well done.
Roger
Well done.
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
14 Mar 2021 00:05 #233716
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Thanks Roger,
That makes me feel a bit better about my precision bodging
. I should be getting better at it, I've done so much welding this past week.
That makes me feel a bit better about my precision bodging
![:D :D](/media/kunena/emoticons/laughing.png)
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
14 Mar 2021 00:24 #233717
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Saturday 13th March,
Jobs done
Jobs tomorrow:
carry on fitting and welding the port arch plate
perhaps seal up the boot floor inside. Not sure what to use, perhaps tiger seal(?)
measure up metal for a rigid brace for front of vehicle during slam panel removal
Jobs done
- finished last two patches of welding on seat pans
- fitted and welded in boot floor
- welded in starboard arch plate and also welded outside seam
Jobs tomorrow:
carry on fitting and welding the port arch plate
perhaps seal up the boot floor inside. Not sure what to use, perhaps tiger seal(?)
measure up metal for a rigid brace for front of vehicle during slam panel removal
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 375
- Thank you received: 50
- Points: 1046.00
14 Mar 2021 22:53 #233733
by Mike G
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Replied by Mike G on topic Giving the Jimny a birthday
Sunday 14th March,
Jobs done
Jobs for tomorrow
WELDING and wire wheeling. I'm under no illusions now that I won't get much further than that in a day.
Jobs done
- tidied up workshop and ditched old templates and off cuts
- finished welding in port arch. Boot floor area welding now completed (finally!)
- bent some bits of metal to use for outer sil starboard side
- bent some bits of metal to use for outer sil port side
- welded in one of the starboard sil plates, two to go.
Jobs for tomorrow
WELDING and wire wheeling. I'm under no illusions now that I won't get much further than that in a day.
2" Trailmaster suspension lift, 2"body lift, snorkel, full breather kit, 29" steel wheels with BFG tyres, tinted rear windows, CRT CB radio with modulator antenna mounted on rear, dog cage and tray in the back.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8953
- Thank you received: 1795
- Points: 37154.00
-
15 Mar 2021 06:44 #233736
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Giving the Jimny a birthday
It's looking close now, couple more hours with a wire wheel and that'll be ready. Good work that man.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.187 seconds