adamjimny

Quick quick!!!!! Don't forget next weekend!

I shall be welding on my diff guards next Saturday and painting up my gussets, trusses and axles, so
I hope its a dry weekend.
This weekend I'm hoping to make up a tiny weeny backbox to hide tight up behind my bumper, just want to let everyone know when i'm about

Good luck with the clutch change

Oh he will be ready. Still useable in low but im changing it for peace of mind and its now become my daily

sent from my Samsung Galaxy S2 using Tapatalk

Get them done!

sent from my Samsung Galaxy S2 using Tapatalk

Well won a cb radio (midland alan 48) with pa function hahaha so now need to order ariel and mount and pa speaker for it.

Found the speaker no worries but im not sure on rest

Im thinking the side mount that bolts to the body? And a mini springer

Will this setup be okay and how do you 'tune' them in

sent from my Samsung Galaxy S2 using Tapatalk

Have a look on Thunderpole's website and have a read up on ground planes, swr tuning and get one of their mini orbiter aerials and whatever mount you want which comes with a fair amount of lead.

If you think the lead might be too short, buy an extension at the same time to save on postage as they are only a couple of quid.

Buy an swr meter and lead too to tune the aerial.

To tune it you adjust it on the grub screw on the aerial mount and if still too long cut the aerial down with a hacksaw.

Kirkynut

Adam ... could you please measure for me which is the exact diameter and width of you tires?

Thanks

Sandro

Yeah course i can do the real life measurements for you. What pressure you want the measurements at....20psi or 30psi? as they are slightly bigger at 30psi

Let me know

sent from my Samsung Galaxy S2 using Tapatalk

Thanks Adam!

20psi will be ok ... real life measurement needs real life pressures

hi where did u get the arches front as the standard ones dont cover my wheels. av got 30mm spacers nd 235.75.15 on the same rims as you. cheers.

Im getting measurements tomorrow pal

The arches are from ebay....landrover extended arches (i dont like them and were all i could use at the time)

I run 16" wheels so they wont be the same as mine as your running 15" wheels.

How wide are your wheels?

Your best bet would be a strip of rubber around standard arches. Thats what ill be doing soon.

sent from my Samsung Galaxy S2 using Tapatalk

from this.....







to this....







to this....





to this so far....









not running yet as i need a couple of parts but getting there. hard top is miles better!

What bits are you short adam? I thought I left all the wiring loom in locks etc in the shell?