Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Project Rust bucket
09 Jul 2019 22:41 #210811
by Paul4A
1999 T registered Jimny. Early G13BB SOHC engine.
Replied by Paul4A on topic Project Rust bucket
Out of interest, would you happen to know roughly how many hours you would have spent on the basic body and chassis repairs i.e .the cutting and welding.
Regards
Paul
Regards
Paul
1999 T registered Jimny. Early G13BB SOHC engine.
Please Log in or Create an account to join the conversation.
10 Nov 2020 23:37 #229915
by MikeJ2003
Replied by MikeJ2003 on topic Project Rust bucket
Hi there
I'm facing a similar repair - need to fabricate some supporting plate for the rear two points where the body mounts to the chassis.
Have dismantled all the bushes and washers for the off-side, but it appears as if the bolt is welded in there and does not remove.
Is this your experience too?
I'm facing a similar repair - need to fabricate some supporting plate for the rear two points where the body mounts to the chassis.
Have dismantled all the bushes and washers for the off-side, but it appears as if the bolt is welded in there and does not remove.
Is this your experience too?
Please Log in or Create an account to join the conversation.
Time to create page: 0.142 seconds