Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rolling project erm.....
- Mister Stu
- Topic Author
- Visitor
-
Public
01 Dec 2013 19:58 #94198
by Mister Stu
Replied by Mister Stu on topic Rolling project erm.....
Didnt get a great deal done today as it was bloody freezing in the garage so i built this out of an old bottle i had buried at the back :whistle:
Please Log in or Create an account to join the conversation.
- page
- Visitor
-
Public
02 Dec 2013 17:45 #94309
by page
Don't no if you can see mate but in the middle there is a gap about 15/20 mm because the front is wider then the rear
Replied by page on topic Rolling project erm.....
Don't no if you can see mate but in the middle there is a gap about 15/20 mm because the front is wider then the rear
Please Log in or Create an account to join the conversation.
- idiotmobil
- Visitor
-
Public
02 Dec 2013 18:27 - 02 Dec 2013 18:28 #94310
by idiotmobil
my old man made a load of these and sold them on ebay they went like hot cakes im always temped to wack some out think he got about 60-70 each for them if you cu the bottom round bit of and it half and turn them in to legs they work well to keep it of the floor
Replied by idiotmobil on topic Rolling project erm.....
Mister Stu wrote: Didnt get a great deal done today as it was bloody freezing in the garage so i built this out of an old bottle i had buried at the back :whistle:
my old man made a load of these and sold them on ebay they went like hot cakes im always temped to wack some out think he got about 60-70 each for them if you cu the bottom round bit of and it half and turn them in to legs they work well to keep it of the floor
Last edit: 02 Dec 2013 18:28 by idiotmobil. Reason: added some
Please Log in or Create an account to join the conversation.
- Mister Stu
- Topic Author
- Visitor
-
Public
02 Dec 2013 20:48 #94329
by Mister Stu
Replied by Mister Stu on topic Rolling project erm.....
I cut down the top corners of the door surround and splayed then out abit to match the roof 
So far iv made about 4 of them for friends for there garages including one made from a 47kg bottle with an oven in the top above the fire
So far iv made about 4 of them for friends for there garages including one made from a 47kg bottle with an oven in the top above the fire
Please Log in or Create an account to join the conversation.
- rayz_x
- Visitor
-
Public
- idiotmobil
- Visitor
-
Public
- chris2010
- Visitor
-
Public
02 Dec 2013 21:19 #94346
by chris2010
Replied by chris2010 on topic Rolling project erm.....
what mm plate is your rear winch tray made from ?
also same question for front.
keep up the good work
also same question for front.
keep up the good work
Please Log in or Create an account to join the conversation.
- Mister Stu
- Topic Author
- Visitor
-
Public
02 Dec 2013 23:03 #94366
by Mister Stu
Replied by Mister Stu on topic Rolling project erm.....
Fabbed it up out of 6mm which is more than enough 
got a few other things to get on with aswell like making the sandwich plates so i can make the cage and tray removable
got a few other things to get on with aswell like making the sandwich plates so i can make the cage and tray removable Please Log in or Create an account to join the conversation.
- chris2010
- Visitor
-
Public
- idiotmobil
- Visitor
-
Public
- Mister Stu
- Topic Author
- Visitor
-
Public
Time to create page: 0.185 seconds