Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Dan's Jimny

  • mudman
  • Visitor
  • Visitor
    Public
30 Jan 2013 14:44 #60248 by mudman
Replied by mudman on topic Dan's Jimny
let me know how much the nose dips buy i may get one iv got the space im just thinking of the waight and the one you just got is cheeper they the 8000lb iv been looking at

Please Log in or Create an account to join the conversation.

  • markyp2000
  • Visitor
  • Visitor
    Public
30 Jan 2013 18:02 #60272 by markyp2000
Replied by markyp2000 on topic Dan's Jimny
It may only dip half inch or so but depends how good your springs are when i took my winch off to overhall it the front didnt go up that much

Please Log in or Create an account to join the conversation.

  • Dan_w
  • Topic Author
  • Visitor
  • Visitor
    Public
31 Jan 2013 00:00 #60348 by Dan_w
Replied by Dan_w on topic Re: Dan's Jimny

darthloachie wrote: looking at the yeti winch on the winch-it website looks to be basically the same winch but black instead of orange


They look pretty much the same, the version I have is slightly newer however and has fins on the left side. A quick phone pic below with keys to help guage the size.

[IMG


I sat it on the front of the car earlier when sizing everything up and didnt notice much of a drop I will however have a measure up and see how much it drops once on there.

Please Log in or Create an account to join the conversation.

  • Dan_w
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Feb 2013 02:27 #61062 by Dan_w
Replied by Dan_w on topic Re: Dan's Jimny
Winch is now all fitted in place, I just need to wire it all up once I decide where to mount the control box, there is plenty of space above the winch so I can just use the cable supplied or stick with my original plan and relocating it under the bonnet but having to buy adequate cable to connect it all up. :unsure:

[IMG


[IMG


[IMG


[IMG


[IMG


[IMG


[IMG


[IMG

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
06 Feb 2013 08:31 #61068 by darthloachie
Replied by darthloachie on topic Re: Dan's Jimny
we fitted ours here
[IMG

Please Log in or Create an account to join the conversation.

  • mudman
  • Visitor
  • Visitor
    Public
06 Feb 2013 10:19 #61081 by mudman
Replied by mudman on topic Dan's Jimny
looking good dan did you check how much drop there was on the front end

Please Log in or Create an account to join the conversation.

  • Dan_w
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Feb 2013 12:50 #61094 by Dan_w
Replied by Dan_w on topic Dan's Jimny
I measured befor fitting but have not checked since, I will get the tape measure out a bit later and check :)

Please Log in or Create an account to join the conversation.

  • Dan_w
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Feb 2013 17:33 #61139 by Dan_w
Replied by Dan_w on topic Dan's Jimny
Finished wiring it all up today, I decided to stick the control box on top of the winch for the time being until I get a second battery, split charging system etc, I will move this all to the passenger side of the engine bay then.

I also checked the difference in height at the front wheel arch and the same point on the front bumper and it only dropped by 5-6mm so I am very pleased.

Please Log in or Create an account to join the conversation.

  • JimnyDan
  • Visitor
  • Visitor
    Public
06 Feb 2013 18:51 #61149 by JimnyDan
Replied by JimnyDan on topic Dan's Jimny
Nice mate!getting even better now, i am very jealous!
Whats next?

Please Log in or Create an account to join the conversation.

  • mudman
  • Visitor
  • Visitor
    Public
06 Feb 2013 23:45 #61248 by mudman
Replied by mudman on topic Dan's Jimny
nice one dan i need to get my hands on a winch now might wait and see what deals are going at the kent 4x4 show

Please Log in or Create an account to join the conversation.

  • Dan_w
  • Topic Author
  • Visitor
  • Visitor
    Public
07 Feb 2013 04:48 #61257 by Dan_w
Replied by Dan_w on topic Dan's Jimny

mudman wrote: nice one dan i need to get my hands on a winch now might wait and see what deals are going at the kent 4x4 show


Sounds like a good idea mate I am sure there will be some good deals.

Dan next is some protection for radius arms and diff's and a CB. Thats it after that :laugh: :laugh: :laugh: Thats what i keep telling myself anyway lol.

Please Log in or Create an account to join the conversation.

  • gaz3359
  • Visitor
  • Visitor
    Public
07 Feb 2013 08:04 #61266 by gaz3359
Replied by gaz3359 on topic Dan's Jimny
Some work gone into this fab !

Please Log in or Create an account to join the conversation.

Time to create page: 0.185 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
Accept
View GDPR policy