Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Tie rod was touching the arm, and the front drive shaft was only a couple of mm off the chassis cross member. Short story, too much caster adjustment on only one eye. I've decided on custom arms. I could put a caster bush in the rear eye but wanted lose the caster bushes. The plates were definitely solid enough but cause too many other headaches to warrant continuing.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.
Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.
Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.
Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.
Haha, tracked down by the "Funky Gibbon". How you going Monkey, this is a great forum for Jimny info. It's where I go looking for info when I can't find it elsewhere, the UK guys know Jimnys.
Yep found you. With the castor adjustment the can do it digitally and get it perfect i will be getting the TSOR arms which are suited to 70 to 100mm lifts and then with offset bushs the castor will be perfect for our height.
Yeah I've already spoken to Pete about a set of his arms and if I feel the need after fitting them I may just put a single caster bush on each side.
Do you have off-set bushs ATM?
Yeah I've had the same set for 10 years
10 years must be getting close to there used by date aye?
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
