Re:Aussie 2006 Jimny - 4" lift, 30" BFGs, cool wheels

So what gearing are you running and tyre size?
Over here you can tow 350kg un-braked, almost not worth bothering with a trailer that small. Or a max of 1300kg braked. Which is fine but very few trailer company's, in the UK, make a braked trailer under 1300kg. The lowest i found so far is 750kg braked. In other words you have to either buy a tiny trailer or get a much bigger trailer with brakes. Nothing inbetween Rant over :laugh:

Nobby

Nobby22 wrote: So what gearing are you running and tyre size?
Over here you can tow 350kg un-braked, almost not worth bothering with a trailer that small. Or a max of 1300kg braked. Which is fine but very few trailer company's, in the UK, make a braked trailer under 1300kg. The lowest i found so far is 750kg braked. In other words you have to either buy a tiny trailer or get a much bigger trailer with brakes. Nothing inbetween Rant over :laugh:

Nobby

My Jimny is the late model VVT version, which VVT has very different ratios.
Big Jimny ratio info
The final ratios are exactly as I planned but to achieve them I;
• Swapped the gearbox for a M13A (Non VVT) gearbox
• Swapped to a 1.3 SJ transfer

My old Jimny had a max towing of 1300kg braked but this newer one is only 600kg or something like that. My camper trailer is about 400kg when loaded but I built it to be light weight for the JImny to tow through soft sand.

Forgot to post this. Scored a rear spoiler off ebay a couple of months back. Brand new "old stock" was already silver for only $70... SCORE!!

Nice one mate. merry christmas.

Had a great and reasonably relaxing Christmas thanks, hope everyone else had an equally great Christmas too. New year was a bit disappointing when I had to turn back from holidays due to Jimny wobble, the warped rotor version. Installed some new rotors, pads and panhard bushes, totally wobble free now for the first time since buying it new.

Finally have nice true rotors no more wobble when braking



Threw on a set of new pads too of course




Finally got around to sorting a new brake balance bracket too

Picked up a used rear bar today which I'll be trimming and grafting these LEDs into



Also bought a Rotax Fuel carrier for the work trailer which also fits well on the roof.