A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fitting Castor Correction Bushes To The Rear!!!
ypvs jimny 350
Visitor
Public
13 Jan 2011 21:30 - 13 Jan 2011 21:31#9550by ypvs jimny 350
hi all well i had to fit rear ones on mine has the springs were bending out and hitting the shocks and if i put a washer behind the bottom of the shocks to clear the springs. then the pan hard rod would rub on the shocks and mines only got 2" spring lift. all sorted now and the springs sitting lovely and no rubingB)
Last edit: 13 Jan 2011 21:31 by ypvs jimny 350. Reason: spelling crap
its something ive thought about but decided it would not be worth it but now you got me re-thinking again
ive got a set of poly caster bushes going spare as ive fitted ora front arms but ive heard they dont flex very well (well not as good as standard rubber bushes) is that right
vitara_mad wrote: its something ive thought about but decided it would not be worth it but now you got me re-thinking again
ive got a set of poly caster bushes going spare as ive fitted ora front arms but ive heard they dont flex very well (well not as good as standard rubber bushes) is that right
The way I see it if you have them lieing around (as I do) then you may as well fit them!!!:laugh:
