A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
2004 jimny m13a TDC and crank pulley removal.
23 Feb 2026 10:04 #263861
by Kappy
2004 jimny m13a TDC and crank pulley removal. was created by Kappy
Still new here, having purchased my 1st Jimny, 2004 JLX came with suspect head gasket issue, price was right.
In the process of removing head and timing chain cover, in need of some advise please.
seeking guidence of finding TDC on DOHC M13A.
Also hints on undoing crank nut and removing crank pulley.
there is a special tool to undo nut, I can fabricate this if someone has dimensions pls.
think I have some gear pulling stuff.
TIA
Kappy
In the process of removing head and timing chain cover, in need of some advise please.
seeking guidence of finding TDC on DOHC M13A.
Also hints on undoing crank nut and removing crank pulley.
there is a special tool to undo nut, I can fabricate this if someone has dimensions pls.
think I have some gear pulling stuff.
TIA
Kappy
Please Log in or Create an account to join the conversation.
23 Feb 2026 14:39 #263867
by fordem
For TDC there should be a notch on the crank pulley and a scale on the timing cover.
If you have the cover off already ...
Replied by fordem on topic 2004 jimny m13a TDC and crank pulley removal.
For TDC there should be a notch on the crank pulley and a scale on the timing cover.
If you have the cover off already ...
Please Log in or Create an account to join the conversation.
Time to create page: 0.152 seconds