A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Where to get a load sensing valve bleed screw?
05 Mar 2025 09:33 - 05 Mar 2025 09:34 #259704
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Where to get a load sensing valve bleed screw?
Just pick up a 7x1.0 bleed nipple from a motorfactors, you have a spare unit to try and screw it into- you could even take it with you to the shop!
It looks like 7x1.0 to me from your photo if the others are 10x1 and 8x1.25.
Typing 7x1.0 into eBay it seems they fit a Clio as well as most motorcycles.
Get ordinary plated steel, not stainless, they will just seize into the cast iron.
It looks like 7x1.0 to me from your photo if the others are 10x1 and 8x1.25.
Typing 7x1.0 into eBay it seems they fit a Clio as well as most motorcycles.
Get ordinary plated steel, not stainless, they will just seize into the cast iron.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Last edit: 05 Mar 2025 09:34 by facade.
Please Log in or Create an account to join the conversation.
Time to create page: 0.181 seconds