A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Lateral rod touching diff housing?!
11 May 2021 18:08 #234985
by Michael83
Replied by Michael83 on topic Lateral rod touching diff housing?!
Too much castor correction?? Holes on axle where control arms bolt on ovaled out badly maybe?? Different diff housing?? Wrong tie rod ends?? Or bent up tie rod end mount?? Collapsed transfer case mounts??
Thinking out load here might give some things to check maybe.
Thinking out load here might give some things to check maybe.
Please Log in or Create an account to join the conversation.
11 May 2021 18:26 #234987
by gv42
Replied by gv42 on topic Lateral rod touching diff housing?!
More like a diy bend
Please Log in or Create an account to join the conversation.
12 May 2021 07:25 #234992
by Busta
Replied by Busta on topic Lateral rod touching diff housing?!
I've seen this come up before but I can't remember exactly what the cause was. It's certainly nothing to do with castor correction or any other part of the vehicle. Its purely caused by the realtionship between the hubs, the track rod and the axle housing.
Please Log in or Create an account to join the conversation.
Time to create page: 0.137 seconds