A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
I was looking at a Japanese "cheat sheet" for the specs. It may have got lost in translation
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
According to the global suzuki site transfer is 1.000 and 2.002 for manual and 1.320 and 2.644 for the auto
Just scanned the document with my scanner and translator. I copied the ratios for reverse! You are correct on the transfer.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Ok so if i buy a push botton tcase and i install reduction gear set then i change actuator with manual stick and i put it on my jb74 does it work? External dimension and mount are the same as jb74 tcase?
