A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Offside front body mount coroded

  • helijohn
  • New Member
  • New Member
    Public
More
14 Nov 2017 06:14 #186215 by helijohn
Replied by helijohn on topic Offside front body mount coroded

petejones69 wrote: Thanks. I know what you mean - it took me ages the other day to wash all the mud out of the void. No idea why they didn't fit the liners back in. I was thinking of making my own.


I'm afraid I am one of those that leaves liners off when I have taken them off unless I can see a good reason to keep them on. They are a pain. I have the same opinion about mud flaps especially rear ones where they attach to the rockers. What I found on my Pinin reinforced this - also the Pinin and my Junior have a liner over the fuel inlet pipe too and when I removed them the gunge behind had to be seen to be believed and it is no wonder the Pinin fuel inlet is such a weak spot for corrosion - but then the whole car was. lol

Please Log in or Create an account to join the conversation.

  • petejones69
  • Topic Author
  • New Member
  • New Member
    Public
More
14 Nov 2017 09:41 #186221 by petejones69
Replied by petejones69 on topic Offside front body mount coroded
'Tis a bit close to the mounting bracket.

Please Log in or Create an account to join the conversation.

More
14 Nov 2017 10:02 - 14 Nov 2017 10:05 #186222 by weecorey
I didn't realize that was the the case, 30cm is a big area, how come the tester just gave an advisory and stated it wasn't in the prescribed area?

Personally I don't see how welding a piece on will have any effect on the strength of the mount, the mount in question only supports an inner wing. If the mount is free from rot I'd be arguing lol
Last edit: 14 Nov 2017 10:05 by weecorey.

Please Log in or Create an account to join the conversation.

  • helijohn
  • New Member
  • New Member
    Public
More
14 Nov 2017 11:00 #186225 by helijohn
Replied by helijohn on topic Offside front body mount coroded

weecorey wrote: piece on will have any effect on the strength of the mount, the mount in question only supports an inner wing. If the mount is free from rot I'd be arguing lol


It's that 'one size fits all' syndrome by the sound of it.

It is where common sense needs to prevail and, as my last experience (well last but one really) of MoT testers was a bit sickening, I really do wonder about some of them. I had one tester who was so fat he could not get in to the driver's seat - literally - and he broke my centre armrest in the process of trying.

Please Log in or Create an account to join the conversation.

More
14 Nov 2017 17:42 #186253 by jackonlyjack

Please Log in or Create an account to join the conversation.

  • petejones69
  • Topic Author
  • New Member
  • New Member
    Public
More
14 Nov 2017 18:01 #186254 by petejones69
Replied by petejones69 on topic Offside front body mount coroded
Thanks for the offer, but I think I'm sorted now with the arch liners.

As an aside, the part that has the hole - is that part of the wing or a separate bracket or what? Could I just replace it? Seems more straightforward that botching it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.100 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)