A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fairly straightforward, l didn't have a correct socket - a 22mm with a cut out for the wire. So l removed the manifold silver cover and also took the little bracket off the rear of the head which is a 10mm bolt that both sensors connect to the loom on, made the access a lot easier.
Then back together again, no problems since and whole job took about 1/2 hr.
Keith
Last edit: 22 Jan 2017 09:48 by KJS. Reason: Spelling
