A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Older g16b conversion help
- Markrush33
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #137283
by Markrush33
Older g16b conversion help was created by Markrush33
Hi people, ive had a good look through the search tool but all the g16b engines used seem to be out of 2000 onwards grand vitaras. My question is ive got a complete '95 automatic vitara with a g16b engine that i want to put in my manual jimny, does it make any difference that its an automatic and can i use the starter motor also any other info help tips would be appreciated,
Hopefully the photo of the engine has uploaded
Cheers mark
Hopefully the photo of the engine has uploaded
Cheers mark
Please Log in or Create an account to join the conversation.
- suzukisam
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #137285
by suzukisam
Replied by suzukisam on topic Older g16b conversion help
My friend has same engine and i have just put a g16b in mine i was looking at his it looks the same except the head is different as its got pick up point on the back where as the one in the pic is a dizzy cap rocker cover different too . Probably need the head then just use jimny inlet exhaust etc..
Please Log in or Create an account to join the conversation.
- Markrush33
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago - 11 years 9 months ago #137289
by Markrush33
Replied by Markrush33 on topic Older g16b conversion help
I saw your posts you put up about doing yours, so you think i need to change the heads over do you!!! What do you mean when you say pick up point
Last edit: 11 years 9 months ago by Markrush33.
Please Log in or Create an account to join the conversation.
11 years 9 months ago #137292
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Older g16b conversion help
For the cam sensor, you may be able to just swap the cam shaft and rocker cover?
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- Markrush33
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #137294
by Markrush33
Replied by Markrush33 on topic Older g16b conversion help
Not the straight forward swap i thought then
Please Log in or Create an account to join the conversation.
- suzukisam
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #137302
by suzukisam
Replied by suzukisam on topic Older g16b conversion help
Doubt it would be to much work to be honest , i would need to see back of the head on my mates vit but there same engine code just get there spark a different way so cant see it been to hard
Please Log in or Create an account to join the conversation.
Time to create page: 0.098 seconds
