A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Engine Rattle at Idle when warm
- JonathonMarshall
- Topic Author
- Offline
- Premium Member
-
Registered
07 Jan 2013 16:45 #57392
by JonathonMarshall
Replied by JonathonMarshall on topic Engine Rattle at Idle when warm
The Suzuki tech has spoken, hadn't heard one that bad - so bad he didnt dare rev it any more 
Definately bottom end shot to sh1t 
Anybody got a spare G13bb kicking about by chance?
Definately bottom end shot to sh1t Anybody got a spare G13bb kicking about by chance? Please Log in or Create an account to join the conversation.
- adamjimny
- Visitor
-
Public
- JonathonMarshall
- Topic Author
- Offline
- Premium Member
-
Registered
07 Jan 2013 21:40 #57445
by JonathonMarshall
Replied by JonathonMarshall on topic Engine Rattle at Idle when warm
Unfortunately adam, I'm going to cut my losses and get shot of it as is. Don't have the money to plough into it, regardless of how I went about it. Onwards and upwards
Please Log in or Create an account to join the conversation.
- adamjimny
- Visitor
-
Public
08 Jan 2013 17:39 #57532
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Engine Rattle at Idle when warm
Davecc has a diesel engine for sale on here that would go in. where are you?
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
Time to create page: 0.304 seconds