A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rocklobster fitting/propshafts
10 Jul 2012 17:27 - 10 Jul 2012 19:42 #43892
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Re: Rocklobster fitting/propshafts
Well I took the rear prop off again today and cut about 8mm from the big spline. Then I took the rear springs off and compressed the suspension onto the damper bump stops. Now have about 8mm to play with as before it was bottoming out.
Very happy with the progress.
Although with the suspension on full sag I could just pull my springs out front and back?? Slightly worrying.
Very happy with the progress.
Although with the suspension on full sag I could just pull my springs out front and back?? Slightly worrying.
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Last edit: 10 Jul 2012 19:42 by j999pre.
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds