A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
jinmy wheel wobble
- mikesjimny
- Topic Author
- Visitor
-
Public
17 May 2012 17:34 #40533
by mikesjimny
jinmy wheel wobble was created by mikesjimny
hi can any1 help i get realy bad wheel wobble its like the wheels r going 2 come off iv looked at the bearings and there fine ow yer and the wobble comes and gos can any 1 tell me wot i can do lol
Please Log in or Create an account to join the conversation.
- reaper
- Visitor
-
Public
17 May 2012 17:40 #40535
by reaper
Replied by reaper on topic Re: jinmy wheel wobble
Dont supose your jim is a 2003 ?
Please Log in or Create an account to join the conversation.
- myers647
- Visitor
-
Public
17 May 2012 18:03 #40537
by myers647
Replied by myers647 on topic Re: jinmy wheel wobble
Th is probably the most common fault on the Jimny. What tyres you running. I had mine balanced properly and its now fine. Most people fit a steering damper to stabilize it. Does this happen at certain speeds 40mph 50mph.?? Check that the king pin bearings havnt gone as well.
Thanks
James
Thanks
James
Please Log in or Create an account to join the conversation.
- mikesjimny
- Topic Author
- Visitor
-
Public
17 May 2012 18:26 #40541
by mikesjimny
Replied by mikesjimny on topic Re: jinmy wheel wobble
lol iv got 215 mud tyres on and iv got a dumper and yes when i get to 40.50 it sterts lol
Please Log in or Create an account to join the conversation.
- mikesjimny
- Topic Author
- Visitor
-
Public
17 May 2012 18:27 #40542
by mikesjimny
Replied by mikesjimny on topic Re: jinmy wheel wobble
lol no its a 51 reg
Please Log in or Create an account to join the conversation.
- myers647
- Visitor
-
Public
17 May 2012 19:10 #40547
by myers647
Replied by myers647 on topic Re: jinmy wheel wobble
I got my wheels balanced made sure my King Pins where all good and also the Tyre pressure has an affect on them too.Trial and error mate.
Thanks
James
Thanks
James
Please Log in or Create an account to join the conversation.
Time to create page: 0.136 seconds