A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
New shocks?
- goatboy
- Topic Author
- Visitor
-
Public
30 Sep 2011 10:43 #22810
by goatboy
Part of the reason I was thinking just spacers (1.5 inch) with new shocks rather than a full spring lift which are 2 inch.
www.jimnybits.co.uk/shop/jimny/jimny-2-/...lift-kit/prod_1.html
Is a pretty cheap solution if you want springs too!
Replied by goatboy on topic Re: New shocks?
Back in Black wrote: mind you that would also mean getting the castor correctors too + other bits and bobs I've not thought about. :woohoo:
Part of the reason I was thinking just spacers (1.5 inch) with new shocks rather than a full spring lift which are 2 inch.
www.jimnybits.co.uk/shop/jimny/jimny-2-/...lift-kit/prod_1.html
Is a pretty cheap solution if you want springs too!
Please Log in or Create an account to join the conversation.
30 Sep 2011 11:56 #22811
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic New shocks?
I also do Rough Country Shocks at around £43 a corner (complete with correct bushing for Jimny's). They are not listed in the shop at present.
-- Sent from my HP TouchPad using Communities
-- Sent from my HP TouchPad using Communities
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.129 seconds