A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Seat belt buzzer termination? (Gen 4)

Andy2640
Topic Author
New Member
Public

10 Aug 2019 21:51 #212009 by Andy2640

Replied by Andy2640 on topic Seat belt buzzer termination? (Gen 4)

Lambert wrote: On the gen3 there's a connection under the steering column that has green and white wires but on a gen4 I have no idea.

Thanks you lot, as i say, i'll molest the wires tomorrow and see what breaks :laugh: :laugh: :pinch:

Please Log in or Create an account to join the conversation.

CC Baxter
New Member
Public

11 Aug 2019 09:05 #212024 by CC Baxter

Replied by CC Baxter on topic Seat belt buzzer termination? (Gen 4)

Good to hear you're trying to silence the various warning buzzers. I'm guessing the Jim4 uses a body control module (Jim3 doesn't) that could be offended by wiring interference. I'm supposed to be working on a module to auto turn off collision warning, I haven't got very far. If you find a way to fix any of these alarms please post some pics, much appreciated.
Chris

Please Log in or Create an account to join the conversation.

yakuza
Offline
Platinum Member
Registered

11 Aug 2019 15:49 #212030 by yakuza

Replied by yakuza on topic Seat belt buzzer termination? (Gen 4)

I did not like any of the sound alarms for lights, keys or seatbelts. I found the buzzer inside the dashboard cluster of my 05 Jimny 3 and put a piece of tape on the connections inside it.
Peace.

This easily reversible too.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

Andy2640
Topic Author
New Member
Public

12 Aug 2019 09:01 #212046 by Andy2640

Replied by Andy2640 on topic Seat belt buzzer termination? (Gen 4)

Please Log in or Create an account to join the conversation.

Andy2640
Topic Author
New Member
Public

12 Aug 2019 09:03 #212047 by Andy2640

Replied by Andy2640 on topic Seat belt buzzer termination? (Gen 4)

I got holted in my tracks when i seen the SRS AIRBAG label on the side of the seat cover.

Is there any danger of interfering in some way with the airbag system if i tinker with the underseat cables ?

DANGER, DANGER .......NOOB ALERT
:dry: :dry: :dry: :dry: :whistle: :whistle: :whistle: :blink: :blink: :blink: :S :S :S :laugh: :laugh: :laugh:

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

12 Aug 2019 09:10 #212048 by Lambert

Replied by Lambert on topic Seat belt buzzer termination? (Gen 4)

Anything in either a yellow sheath or with a yellow plug is srs and to be left alone. It is possible that the belt sensor is coupled with the seats occupant sensor and it's all passing through the srs computer. You need to try and find a diagram for the seat and buzzer system really.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

Time to create page: 0.160 seconds

Seat belt buzzer termination? (Gen 4)

Events Menu