A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Shaker ramp for MoT
- Daniel30
- New Member
-
Public
Less
More
- Thank you received: 0
08 Jul 2015 20:07 - 08 Jul 2015 20:09 #147453
by Daniel30
Replied by Daniel30 on topic Shaker ramp for MoT
Now that's just taking the pea never seen anything like that :silly: :woohoo:
Like something from the terminator :woohoo:
Like something from the terminator :woohoo:
Last edit: 08 Jul 2015 20:09 by Daniel30. Reason: Text
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
08 Jul 2015 20:11 #147454
by helijohn
Yes, it looks like a joint wrecker.
Replied by helijohn on topic Shaker ramp for MoT
gusthegorilla wrote: .that thing will have consigned most of them to the scrappies :whistle:
Yes, it looks like a joint wrecker.

Please Log in or Create an account to join the conversation.
- Longman
- New Member
-
Public
Less
More
- Thank you received: 0
08 Jul 2015 20:38 #147459
by Longman
Replied by Longman on topic Shaker ramp for MoT
All mot ramps have shaker plates but most are manual where you have to shake the wheel by hand.it takes alot of play in bushes to fail so I wouldn't worry too much.
Please Log in or Create an account to join the conversation.
- supergaz
- New Member
-
Public
Less
More
- Thank you received: 0
08 Jul 2015 20:41 #147461
by supergaz
Replied by supergaz on topic Shaker ramp for MoT
Should try out the HGV shaker plates I install in DVSA test lanes, they move 100mm in all directions.
Please Log in or Create an account to join the conversation.
08 Jul 2015 21:10 #147462
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Shaker ramp for MoT
Mine gets more hammering driving along the "roads" round here. :laugh:
I've broken two front springs in The Other Car already
I've broken two front springs in The Other Car already

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there

Please Log in or Create an account to join the conversation.
- idiotmobil
- New Member
-
Public
Less
More
- Thank you received: 0
08 Jul 2015 21:21 #147464
by idiotmobil
Replied by idiotmobil on topic Shaker ramp for MoT
I've found things pass with those ramps that I know is fucked chucked a couple cars in just to see how badly they failed before spending money and the bits I knew were knackered ballpoints etc passed as it doesn't show up as well as a man with a bar. Lazy flashy mot testers imo
Please Log in or Create an account to join the conversation.
Time to create page: 1.063 seconds