A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
What did you do to your jimny today?
- lookonimages
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 393
- Thank you received: 65
19 Jun 2021 00:41 #235949
by lookonimages
Replied by lookonimages on topic Re:What did you do to your jimny today?
Please Log in or Create an account to join the conversation.
- Dirtbird
- Visitor
-
Public
19 Jun 2021 06:48 #235954
by Dirtbird
Replied by Dirtbird on topic Re:What did you do to your jimny today?
Verrrrry Nice.
Please Log in or Create an account to join the conversation.
30 Jun 2021 12:27 #236254
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:What did you do to your jimny today?
I did what Suzuki should have done in the first place, tinted the load area windows. Why a commercial would have been built with clear glass is a complete mystery.
Went for 20% tint as this is what is on the original SZ5 as standard. 5% would have been too dark.
Sent from my moto g( power using Tapatalk
Went for 20% tint as this is what is on the original SZ5 as standard. 5% would have been too dark.
Sent from my moto g( power using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Lambert
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9047
- Thank you received: 1811
30 Jun 2021 16:44 #236259
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Re:What did you do to your jimny today?
Looking good, dark cars with dark windows are the future!
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
30 Jun 2021 19:32 #236264
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic What did you do to your jimny today?
Looks much better.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
- Roger Fairclough
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1457
- Thank you received: 210
30 Jun 2021 21:00 #236268
by Roger Fairclough
Replied by Roger Fairclough on topic What did you do to your jimny today?
All the car to van conversions I have seen have the rear windows removed and substituted with steel sheet spot welded into position.
Roger
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9047
- Thank you received: 1811
30 Jun 2021 21:22 #236269
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic What did you do to your jimny today?
Leviathan is opaque vinyl on factory glass as was Dreadnaught because these types of conversion are usually done by or on behalf of the importers or dealers because of the low unit sales. Things like a fiesta or corsa van are usually sheet metal because the unit sales will warrant the factory tooling.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Reason2doubt
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 398
- Thank you received: 100
13 Jul 2021 10:16 - 13 Jul 2021 10:17 #236664
by Reason2doubt
Replied by Reason2doubt on topic What did you do to your jimny today?
Some big changes happening at the moment.
All the plastic body trim has come off so I can address the persistent rust issues.
After speaking with Keith, I've got a full set of his unique arches on the way to replace the stock trim. So, the past few days I've been filling the holes on the door and fixing some bad rust on the front wings (where they connect to the body at the bottom).
Also removing the old tin from the rear arches which was on its last legs:
Big thanks to Keith for the ongoing support and silly questions!
All the plastic body trim has come off so I can address the persistent rust issues.
After speaking with Keith, I've got a full set of his unique arches on the way to replace the stock trim. So, the past few days I've been filling the holes on the door and fixing some bad rust on the front wings (where they connect to the body at the bottom).
Also removing the old tin from the rear arches which was on its last legs:
Big thanks to Keith for the ongoing support and silly questions!
Last edit: 13 Jul 2021 10:17 by Reason2doubt.
The following user(s) said Thank You: Keithy
Please Log in or Create an account to join the conversation.
- Reason2doubt
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 398
- Thank you received: 100
24 Jul 2021 08:25 - 24 Jul 2021 08:35 #236918
by Reason2doubt
Replied by Reason2doubt on topic What did you do to your jimny today?
Progress continues with the overhaul of the Jimny. The rear of the car was cut away to take out all the rust and silicon that had been holding it together (thanks KAP Suzuki for the bodge job!).
This left me with a slightly smaller back end and two body mounts to re-create. I decided to do away with the small jack holding area in the boot despite it not being in bad condition at all (easier for my novice welding skills!). Plenty of rust to get to grips with too, so I made a start of chipping it away...
Keith sent over a set of his arches for me to trim and install. 4x arches, bonnet vents, and a new rear bumper will be installed shortly!
All the plastic trim has been removed now, and I had a nice time welding small squares and circles of metal into the holes left on the side of the car. Thankfully, Raptor paint should hide the bad bits of filler that I didn't do such a good job of at sanding!
Todays job...shape the front wheel arches!
This left me with a slightly smaller back end and two body mounts to re-create. I decided to do away with the small jack holding area in the boot despite it not being in bad condition at all (easier for my novice welding skills!). Plenty of rust to get to grips with too, so I made a start of chipping it away...
Keith sent over a set of his arches for me to trim and install. 4x arches, bonnet vents, and a new rear bumper will be installed shortly!
All the plastic trim has been removed now, and I had a nice time welding small squares and circles of metal into the holes left on the side of the car. Thankfully, Raptor paint should hide the bad bits of filler that I didn't do such a good job of at sanding!
Todays job...shape the front wheel arches!
Last edit: 24 Jul 2021 08:35 by Reason2doubt.
The following user(s) said Thank You: Soeley
Please Log in or Create an account to join the conversation.
- Reason2doubt
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 398
- Thank you received: 100
24 Jul 2021 18:30 #236934
by Reason2doubt
Replied by Reason2doubt on topic What did you do to your jimny today?
The following user(s) said Thank You: Keithy
Please Log in or Create an account to join the conversation.
24 Jul 2021 18:48 #236937
by Keithy
Replied by Keithy on topic What did you do to your jimny today?
Replaced my clutch......replaced the rusty screws in my snorkel top.....adjusted the rear door.....contemplated touching up some paint and fitting some MK45 rear corners......maybe next year eh!
Not as exciting as R2D above.......I've been meaning to do the above for over a year.....time eh!
Not as exciting as R2D above.......I've been meaning to do the above for over a year.....time eh!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9047
- Thank you received: 1811
26 Jul 2021 18:47 #237014
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic What did you do to your jimny today?
Today I have been mostly fitting my private number plates. Finally.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Time to create page: 0.485 seconds