Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did you do to your jimny today?
- TomDK
- Visitor
-
Public
And a support-bracket does come with the adaptor 
www.flaminfabrications.com.au/winch-upgrades
Yes I have given the edge of the bonnet some thought. doesn't look too clean as it is now. Perhaps I should do as you mention, and then weld it together with the supporting structure on the underside. This hould also give back some of the strength, now that I've removed so much from it.
I think I'll keep the rubber boots for the motor connections. They do provide some protection against short circuiting.
Edit:
Yes, really need a bigger alternator and also another battery. I'm planning on installing another similar battery in a few months, and putting the both in the back. Don't have rear seats fitted, so this would be the best solution regarding weight distribution
Please Log in or Create an account to join the conversation.
- Swifty
- Visitor
-
Public
Cheers James, top guy,
Please Log in or Create an account to join the conversation.
Swifty wrote: Took my poorly Jimny over to Todmorden where James (J999PRE) kindly showed me how to tackle checking and rebuilding the hub for leakage issue's, learnt a lot and will have a go at tackling the other side myself. I now have a nice clean hub!!!!!
Cheers James, top guy,
Good effort James! It's nice we have a forum where people are happy to help each other out.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- Yellostreak
- Visitor
-
Public
Swifty wrote: Took my poorly Jimny over to Todmorden where James (J999PRE) kindly showed me how to tackle checking and rebuilding the hub for leakage issue's, learnt a lot and will have a go at tackling the other side myself. I now have a nice clean hub!!!!!
Cheers James, top guy,
Did mine also.. took a total of 15 minutes using my trusty electric impact wrench!.. even jacked up the other side to tip the oil onto the seal before packing up and its still fine..
success also finished putting the rest of those extra 6 inches between the top of the wheel and the wheel arch.. only problem now is I have to do the bracket for the load proportioning valve... anybody got a photo showing the standard one so I can guestimate the size of the bracket on mine..?
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
kirkynut wrote:
Swifty wrote: Took my poorly Jimny over to Todmorden where James (J999PRE) kindly showed me how to tackle checking and rebuilding the hub for leakage issue's, learnt a lot and will have a go at tackling the other side myself. I now have a nice clean hub!!!!!
Cheers James, top guy,
Good effort James! It's nice we have a forum where people are happy to help each other out.
Kirkynut
What he said, nice one James you get my 'Good Guy of the Day' award ..............
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public