Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
Turbo M16A Jimny
- Motleycrew
-
Topic Author
- Offline
- Elite Member
-
Registered
12 Feb 2022 08:46 #241804
by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Offset air filter added and a few better pictures of the setup in day light. The car is abit tired but I thought I could transfer this all over to a newer Jimny in the future.
Please Log in or Create an account to join the conversation.
- Motleycrew
-
Topic Author
- Offline
- Elite Member
-
Registered
12 Feb 2022 08:50 #241805
by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Side in picture
Please Log in or Create an account to join the conversation.
- Motleycrew
-
Topic Author
- Offline
- Elite Member
-
Registered
12 Feb 2022 08:54 - 12 Feb 2022 08:54 #241806
by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
Going to cut a label up the 3 connectors for the new ECU most of it will be redundant. Spoke to the auto electrician who is a elderly family friend. I can do most of it myself, he will just check it over at the end
Last edit: 12 Feb 2022 08:54 by Motleycrew.
Please Log in or Create an account to join the conversation.
- Motleycrew
-
Topic Author
- Offline
- Elite Member
-
Registered
12 Feb 2022 16:23 #241823
by Motleycrew
Replied by Motleycrew on topic Turbo M16A Jimny
That wouldn’t be possible to unplug and switch between the two as the new ECU connector will be using the Jimnys existing wiring. You could just take the wires out of the new connector and put them back in the old as I will leave the old connectors in situ. The new connector has 34 pins where as the Jimny has 72 on the three. I won’t be using all 34 pins. I have attached a picture of the Jimny ECU pin out. E17,E18
Please Log in or Create an account to join the conversation.
Time to create page: 0.150 seconds