Dave's "S200KYS" Jimny 'laner Build...

How about some storage boxes fitted over the wheel arch???

Very nice Dave ! I'm tempted to rip out the plastics on the rear side panels see how much space I gain

Gary

All depends how much we actually need to carry?...

I'm trying to get organised, but then don't want to carry too much weight either... (there's a joke there somewhere Gary! :whistle: )

... so started writing a list

Somethings need to be more accessible than others too... Tree Strop, Gloves, etc...

Nice new blue tote boxes arrived today too, photos in Sundays blog / this build thread update...

(I can't / shouldn't / wouldn't pinch them from the newspaper wholesaler... they're all barcoded so they know where they are too!)

Bits4Vits wrote:
I'm trying to get organised, but then don't want to carry too much weight either... (there's a joke there somewhere Gary! :whistle: )
.

It's a good thing you're as slim as a racing snake then Dave as it looks like you are planning loads of extra weight in the car !

Had a nice full day on the Jimny yesterday, as always, full details and all the photos are on My Blog , but last night by the time I'd finished at 7pm, showered, and then full of lager and kebab, I just wanted to sleep. so hence the update today!



The roll hoop is now finished and ready for powdercoating, complete with Hi-Lift mount, crossbar for the tyre to sit against, tabs for the tyres strap, worklight in the back, and little hoops for tying other bits in if needed...





I then disassembled the Jimny's drivers seat -



And then combined it with my trusty old waterproof bucket seat -



And then spent a couple of hours playing with my new Dremmel ("Master" Angry - not like big Mr. Angry!), and made -



My switch panel... So... what are all them switches for?! Top row, left to right, are front LED spotlight bar (got a 21" one from JimnyBits incase of night 'laning / late finishes), then there's two pairs of winch switches, I didn't want the switches "live" all the time, so they each have a yellow aircraft switch that must be switched on before the in/out rocker switch to the right of them become active. There's a switch for the rear winch as well as the front, I've already bought this, but won't be fitting it for a while yet, in phase two of the build... Phase one is get enough done to get out 'laning by the third weekend in July... The bottom row of switches then are for a rear 4-LED spotlight on the rear, and then obviously the ARB compressor and Rear Locker switch, there's then a gap in the middle... but no, no front locker... I'm planning on grafting a Vitara front LSD into the front axle, with some of Rob Storr's 26 Spline Shafts! That gap will soon get filled though, a switch for the rear internal worklight is needed, and I'd like a horn push in the middle too, linked two a pair of decent horns, but still retaining the cute "Peep Peep" horn via the steering wheel push...