Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

Dave's "S200KYS" Jimny 'laner Build...

More
02 Jun 2015 09:50 #145295 by Jezz
Your probably correct Dave reference the props etc. But the rear wasn't designed to have discs so there has to be a compromise somewhere using existing parts available. Just my thoughts anyway.

It's been fettled just a tad.
The topic has been locked.
More
02 Jun 2015 10:30 #145297 by X8GGY
OK... carry on regardless... :laugh:
The topic has been locked.
More
02 Jun 2015 15:14 #145316 by X8GGY
Just got back from walking our Labradors, and while I was out one of the lads from the friendly garage around the corner has dropped my shafts off complete with new bearings and ABS rings...

And tomorrow?... just happens to be my day off!

B)
The topic has been locked.
  • Rockwatt
  • Visitor
  • Visitor
    Public
02 Jun 2015 17:19 #145327 by Rockwatt
Replied by Rockwatt on topic Dave's (Bits4Vits) Jimny 'laner Build...
All the strength comes from from the flat surfaces being pressed together to form a frictions joint. The regester only lines everything up untill its all tightened ! the studs do a good enough job of that to stop it fouling the calipers. And the wheels nuts pull the wheel true so all is good !
The only time it would rely on the register is if the wheels nuts come loose but if that happens then its game over anyway lol
The topic has been locked.
More
02 Jun 2015 19:34 #145334 by X8GGY
The topic has been locked.
More
03 Jun 2015 08:54 #145346 by funkyjimny
My Rob Storr kit on my old green jimny was exactly the same except for using Jimny front calipers (and a transfer box handbrake) . I've been chuffed with the Jimnybits kit on mine, more brake balance front to rear with using the Renault rear calipers and much better handbrake.

Gary
The topic has been locked.
Time to create page: 0.202 seconds
Joomla template by a4joomla