×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Crunch time
- Daniel30
- Topic Author
- Visitor
-
Public
07 Jan 2018 12:31 #188093
by Daniel30
Crunch time was created by Daniel30
Went out in the jim today about 20min drive and it crunched about 6 times going in or back down to 2nd gear.
Gearbox on the way out?
Gearbox on the way out?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8819
- Thank you received: 1763
- Points: 36305.00
07 Jan 2018 13:00 #188095
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Crunch time
Assuming that the oils were fairly recently changed then yeah possible box issue.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- Visitor
-
Public
07 Jan 2018 14:15 #188097
by Daniel30
Replied by Daniel30 on topic Crunch time
About 2 years ago and I have done minimal miles
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8819
- Thank you received: 1763
- Points: 36305.00
07 Jan 2018 16:36 #188098
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Crunch time
Sounds like a syncro hub is tired if it's just crunching 2nd?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- Visitor
-
Public
07 Jan 2018 16:38 #188099
by Daniel30
Replied by Daniel30 on topic Crunch time
Is that a gear box out job do you know?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8819
- Thank you received: 1763
- Points: 36305.00
07 Jan 2018 16:41 #188100
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Crunch time
Out and in bits. Specialist job.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- Visitor
-
Public
07 Jan 2018 17:32 #188104
by Daniel30
Replied by Daniel30 on topic Crunch time
Pants
Please Log in or Create an account to join the conversation.
- CharlesS
- Visitor
-
Public
07 Jan 2018 20:06 #188108
by CharlesS
Replied by CharlesS on topic Crunch time
Verify the level of gear lube in the transmission is at the recommended level. If you cannot touch the gear lube at the fill hole; then it may be low. Start looking for gear lube leaks... If fluid needs to be added; make sure to use the proper type (GLI3,4 or 5) fluid.
Some gear lubes have sulfur content that can affect brass/bronzed synchros.
Some gear lubes have sulfur content that can affect brass/bronzed synchros.
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- Visitor
-
Public
07 Jan 2018 20:39 #188109
by Daniel30
Replied by Daniel30 on topic Crunch time
There are no leaks that I can see, no marks on my drive
I will get the level checked this week to be sure
Thank you
I will get the level checked this week to be sure
Thank you
Please Log in or Create an account to join the conversation.
- CharlesS
- Visitor
-
Public
07 Jan 2018 21:06 #188111
by CharlesS
Replied by CharlesS on topic Crunch time
The FSM indicates the level should be just below the inspection hole and 75W/90 gear lube is recommended. The transmission holds approximately 2.5 pints.
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- Visitor
-
Public
18 Jan 2018 17:00 #188527
by Daniel30
Replied by Daniel30 on topic Crunch time
Well very strange a 20min drive to the mechanic today for the crunch in 2nd problem and it never done it. The plug had no fragments on it either so some fresh oil drive back was sweet as a nut
Please Log in or Create an account to join the conversation.
- 1066Boy
- Visitor
-
Public
18 Jan 2018 17:24 #188530
by 1066Boy
Replied by 1066Boy on topic Crunch time
Did you check the clutch adjustment at the same time?
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds