×
A section for Vitara and SJ owners.
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
Grand vitara Snorkel
- MarkBoulton
- Topic Author
- Visitor
-
Public
30 Jan 2018 19:59 #188993
by MarkBoulton
Grand vitara Snorkel was created by MarkBoulton
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
- Points: 9981.00
-
30 Jan 2018 20:24 #188995
by X8GGY
Replied by X8GGY on topic Grand vitara Snorkel
I'd start by nagging the supplier?
Or, get a piece of cardboard, cut a hole the size of the tube that sticks through the wing out of it and then slip it over the tube and draw around the snorkel body, and poke a screwdriver through into the mounting bolt threaded holes, then cut around the shape of the body and use that to line up where everything needs to go...?
Or, get a piece of cardboard, cut a hole the size of the tube that sticks through the wing out of it and then slip it over the tube and draw around the snorkel body, and poke a screwdriver through into the mounting bolt threaded holes, then cut around the shape of the body and use that to line up where everything needs to go...?
The following user(s) said Thank You: MarkBoulton
Please Log in or Create an account to join the conversation.
- MarkBoulton
- Topic Author
- Visitor
-
Public
30 Jan 2018 20:31 #188996
by MarkBoulton
Replied by MarkBoulton on topic Grand vitara Snorkel
Thanks S200KYS,
Nagged the supplier to the point he wants to partial refund !
Did the cardboard too no problem but this snorkel is shaped like the wing and fits anatomically round it so it is very difficult to determine exactly where it goes on the body.
Nagged the supplier to the point he wants to partial refund !
Did the cardboard too no problem but this snorkel is shaped like the wing and fits anatomically round it so it is very difficult to determine exactly where it goes on the body.
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2934
- Thank you received: 656
- Points: 8576.00
31 Jan 2018 17:15 #189021
by jackonlyjack
Replied by jackonlyjack on topic Grand vitara Snorkel
Start new template up the inside of snorkel where it touches the wing
Then you will have an idea as to the position
Better to make the big hole a little higher then you can elongate downwards
That way you will not have any hole on show![;) ;)](/media/kunena/emoticons/wink.png)
Jack
Then you will have an idea as to the position
Better to make the big hole a little higher then you can elongate downwards
That way you will not have any hole on show
![;) ;)](/media/kunena/emoticons/wink.png)
Jack
The following user(s) said Thank You: MarkBoulton
Please Log in or Create an account to join the conversation.
Time to create page: 0.080 seconds