Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
It isn't for cosmetics, primarily to improve stopping from 60mph (most roads around here are national speed limit) and secondarily as the rear drums look shot - I'll try to upload pictures now
I depressed the stick (out of gear, clutch down) and it slid backward into low ratio but as soon as I released the stick it jumped forward into 4H (as if it didn't "click" into place).
Vehicle has lift kit and locking hubs (unlocked when I bought it 8 days ago) so I'll have a look underneath to see if it's catching anything
I depressed the stick (out of gear, clutch down) and it slid backward into low ratio but as soon as I released the stick it jumped forward into 4H (as if it didn't "click" into place).
Vehicle has lift kit and locking hubs (unlocked when I bought it 8 days ago) so I'll have a look underneath to see if it's catching anything
As JackOnlyJack mentioned it could be that the lift is cauing something to catch on the 4L selector lever, perhaps it is stopping it going all of the way.
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
2" to 3" bodylift could cause this. Or a broken rubber mount for the transfer case.
Slightly trimming the opening in the floor for the gear lever or bending the lever a bit, or a combination have been done to sort this.
