Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Aussie 2006 Jimny - 4" lift, 30" BFGs, cool wheels

zukenutter
Topic Author
Visitor
Public

31 Jan 2012 20:18 - 31 Jan 2012 20:19 #32357 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

VAXXi wrote:
wanderinstar wrote: Are they twin fuel filters in the middle of the picture. Is fuel that bad in Aus?

They're for the diff/transfer case breathers.

:woohoo:

Lotus Elise styling on the Jimny, I like that.

Last edit: 31 Jan 2012 20:19 by zukenutter.

Please Log in or Create an account to join the conversation.

zukenutter
Topic Author
Visitor
Public

02 Feb 2012 11:19 #32453 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

Got the led tubes fibre glassed in today and sanded down ready for filler. Hopefully I'll get it done and ready for paint tomorrow.

Please Log in or Create an account to join the conversation.

wanderinstar
Visitor
Public

02 Feb 2012 11:56 #32454 by wanderinstar

Replied by wanderinstar on topic Re: Aussie 2000 Jimny

Looks very well. What were the tubes, where did you get them from.

Please Log in or Create an account to join the conversation.

zukenutter
Topic Author
Visitor
Public

02 Feb 2012 11:59 #32455 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

LEDs are from eBay and the tubes are plumbing supply from the local hardware

Please Log in or Create an account to join the conversation.

Keefe
Visitor
Public

02 Feb 2012 12:07 #32456 by Keefe

Replied by Keefe on topic Re: Aussie 2000 Jimny

This link any good, Ian?

www.cbsonline.co.uk/category/Lighting,b.html

Please Log in or Create an account to join the conversation.

wanderinstar
Visitor
Public

02 Feb 2012 12:20 - 07 Feb 2012 10:27 #32458 by wanderinstar

Replied by wanderinstar on topic Re: Aussie 2000 Jimny

Aahh yes I remember them. I used to have a catalogue when I was thinking about building a Lotus 7 type kit car.

Last edit: 07 Feb 2012 10:27 by wanderinstar.

Please Log in or Create an account to join the conversation.

zukenutter
Topic Author
Visitor
Public

07 Feb 2012 01:36 #32878 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

a few steps closer

Finished sculpting

High fill spray putty to hide my imperfections

Please Log in or Create an account to join the conversation.

Keefe
Visitor
Public

07 Feb 2012 07:38 #32881 by Keefe

Replied by Keefe on topic Re: Aussie 2000 Jimny

Very, very nice!

Please Log in or Create an account to join the conversation.

darthloachie
Visitor
Public

07 Feb 2012 07:51 #32888 by darthloachie

Replied by darthloachie on topic Re: Aussie 2000 Jimny

nice job
you going to do the vertical lights next?

Please Log in or Create an account to join the conversation.

zukenutter
Topic Author
Visitor
Public

07 Feb 2012 09:06 #32894 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

Cheers again guys. I'll get some paint tomorrow and fit it. As for the verticals I'm thinking about some creative sign vinyl wrapping or I'll just leave them as is. We'll see how it looks once it's bolted up.

I also need to make some mud flap adjustments.

Please Log in or Create an account to join the conversation.

Emplan
Visitor
Public

07 Feb 2012 17:50 #32932 by Emplan

Replied by Emplan on topic Re: Aussie 2000 Jimny

A bit of inspiration for ya rear lights

Cant quite see them fully but you get the idea

Great work your doing there fella

Regards

Tony

Please Log in or Create an account to join the conversation.

zukenutter
Topic Author
Visitor
Public

07 Feb 2012 19:44 #32950 by zukenutter

Replied by zukenutter on topic Re: Aussie 2000 Jimny

Tony you're totally on the money.
This is a friends LJ.

Please Log in or Create an account to join the conversation.

Time to create page: 0.177 seconds

Re:Aussie 2006 Jimny - 4" lift, 30" BFGs, cool wheels

Events Menu