A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Bigchridy wrote: Does anyone no a rough price as to how much a rockwatt rocklobster would cost? I dont have the transfer boxes yet so dont want to mess Richard about by calling him and not being able to say yes to doing the work.
Obviously I get that no one will be able to give me an exact price but just need an estimate so I can save for it!!!
Bigchridy wrote: dont want to mess Richard about by calling
Just Call i dont bite :lol:
Hi Rockwatt (and welcome), MigCooper of this forum cannot get hold of a 410 and 413 box in Ireland. If there is any chance of making a Rocklobster up from scratch without t-boxes being supplied could you let him (or me) know.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Bigchridy wrote: dont want to mess Richard about by calling
Just Call i dont bite :lol:
Hi Rockwatt (and welcome), MigCooper of this forum cannot get hold of a 410 and 413 box in Ireland. If there is any chance of making a Rocklobster up from scratch without t-boxes being supplied could you let him (or me) know.
Bigchridy wrote: dont want to mess Richard about by calling
Just Call i dont bite :lol:
Hi Rockwatt (and welcome), MigCooper of this forum cannot get hold of a 410 and 413 box in Ireland. If there is any chance of making a Rocklobster up from scratch without t-boxes being supplied could you let him (or me) know.
Martin
Its already in hand Martin!!!
and in very god hands ... Thanks a lot for all the help
and finally things seems to be moving in "hi gear"
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Bigchridy wrote: dont want to mess Richard about by calling
Just Call i dont bite :lol:
Hi Rockwatt (and welcome), MigCooper of this forum cannot get hold of a 410 and 413 box in Ireland. If there is any chance of making a Rocklobster up from scratch without t-boxes being supplied could you let him (or me) know.
Martin
Its already in hand Martin!!!
Yep all sorted martin
I have a read on here quite often and see people get pointed to difflock to get hold of me so i thought i should join up so its easyer to contact me.
Richard
(shed bulider that just happens to be a fully quallified design engineer for 23 year)
I was getting all set up to swap in a 413 case to my 2006 VVT Jimny with push button 4WD. Unfortunately once I got it out I realised it's high range is 1:1. I only want to run 235/75R15 but want to get rid of the delicate and troublesome push button operation. I'm looking for a close to stock high range ratio.
I´m also interessed on the T-case for install on my jimny, like mig cooper ( that´s also from portugal like me), and like him i can not get 2 transfer cases in Ireland, so if Marin or Rockwatt, can plese give me the price of the t-case changed, i would apreciate.
Ahh Mr RockWatt I too would love to reduce my ratio's but donot have access to source the bits required... Also, the time I spend in the UK is usually weekends these days, so its always difficult to lotacte the items you usually require.
Do you have any "off the shelf" units ?
Former owner of Little "Ooky", who has now started a new life in Shetland
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
