×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:M16A oil filter adapter
Less
More
- Posts: 21
- Thank you received: 0
- Points: 93.00
25 Oct 2024 11:52 #258048
by CB1289
M16A oil filter adapter was created by CB1289
Hi guys
I'm planning on swapping my non-VVT 1.3 to a 1.6 non-VVT and I seem to remember seeing something about needing an adapter to orientate the oil filter vertically rather than horizontally in order to make it fit.
Firstly, is that correct/necessary? And if so, do you know where I could source an adapter?
Thanks
I'm planning on swapping my non-VVT 1.3 to a 1.6 non-VVT and I seem to remember seeing something about needing an adapter to orientate the oil filter vertically rather than horizontally in order to make it fit.
Firstly, is that correct/necessary? And if so, do you know where I could source an adapter?
Thanks
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 421
- Thank you received: 178
- Points: 2345.00
25 Oct 2024 14:45 #258049
by gv42
Replied by gv42 on topic M16A oil filter adapter
Have a look on the bigjimny shop
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 21
- Thank you received: 0
- Points: 93.00
25 Oct 2024 15:12 #258050
by CB1289
Replied by CB1289 on topic M16A oil filter adapter
Hi
Yeh I did take a look but either I'm being daft (probably) or there is none on there?
Cheers
Yeh I did take a look but either I'm being daft (probably) or there is none on there?
Cheers
Please Log in or Create an account to join the conversation.
25 Oct 2024 16:07 #258051
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:M16A oil filter adapter
It's here
www.bigjimny.com/store/jimny-gen3/stand-oil-filter
Sent from my ThinkPhone by motorola using Tapatalk
www.bigjimny.com/store/jimny-gen3/stand-oil-filter
Sent from my ThinkPhone by motorola using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 21
- Thank you received: 0
- Points: 93.00
25 Oct 2024 17:28 #258052
by CB1289
Replied by CB1289 on topic Re:M16A oil filter adapter
Thanks Martin
I notice the page refers to the VVT engine - do you know if this is required for the non-VVT?
Cheers
I notice the page refers to the VVT engine - do you know if this is required for the non-VVT?
Cheers
Please Log in or Create an account to join the conversation.
25 Oct 2024 17:41 #258053
by Busta
Replied by Busta on topic Re:M16A oil filter adapter
Yes it is.
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds