×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
What size tyres.
Less
More
- Posts: 3
- Thank you received: 0
- Points: 21.00
24 Oct 2024 04:36 #258028
by SRD0060
What size tyres. was created by SRD0060
Hey everyone, ony new here and new to Jimnys, I own a 2024 XL Jimny. Question I have is, can I fit 235/75r15 KO2 tyres to my stock 15" jimny rims? i also have an Ironman 2" lift and front bar.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 982
- Thank you received: 184
- Points: 5651.00
24 Oct 2024 07:54 #258031
by 300bhpton
Replied by 300bhpton on topic What size tyres.
Scroll to the bottom of this page for size info: www.bfgoodrichtires.com/auto/tires/mud-terrain-t-a-km3
Technically a 235/75 should be on a 6.0” wide rim as a minimum. The Jimny rims are 5.5”. However, the tyre will physically fit. Depending on laws in your country this may or may not be an issue.
Other than that. Yes it should fit as far as I know.
Technically a 235/75 should be on a 6.0” wide rim as a minimum. The Jimny rims are 5.5”. However, the tyre will physically fit. Depending on laws in your country this may or may not be an issue.
Other than that. Yes it should fit as far as I know.
The following user(s) said Thank You: SRD0060
Please Log in or Create an account to join the conversation.
24 Oct 2024 11:00 #258033
by saxj
Replied by saxj on topic What size tyres.
With 50mm lift and the bumper, you shouldn't experience any rubbing issues. I have run 235/75R15 for 90000km on the stock rims without any issues.
Note that 235's affect your fuel consumption and performance severely. I ended up fitting crawler gears to help with performance. The gears didn't improve fuel consumption though.
Note that 235's affect your fuel consumption and performance severely. I ended up fitting crawler gears to help with performance. The gears didn't improve fuel consumption though.
The following user(s) said Thank You: SRD0060
Please Log in or Create an account to join the conversation.
Time to create page: 0.084 seconds