×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
.dxf Tech Drawing for R7 Gearbox
07 Jul 2024 19:27 #256679
by Keithy
.dxf Tech Drawing for R7 Gearbox was created by Keithy
May help some with their Jimny related projects.....this is the .dxf of the adapter plate I machined for my 6 speed Lexus gearbox conversion.....it even fits!
The following user(s) said Thank You: Lambert
Please Log in or Create an account to join the conversation.
07 Jul 2024 23:31 #256683
by me101
2007 Little Jim with cheap mods!
www.youtube.com/channel/UCeBDekO99Qk2aOmBmSmrI9w
Replied by me101 on topic .dxf Tech Drawing for R7 Gearbox
Hi, is this a Lexus box to a M13a engine?
2007 Little Jim with cheap mods!
www.youtube.com/channel/UCeBDekO99Qk2aOmBmSmrI9w
Please Log in or Create an account to join the conversation.
09 Jul 2024 22:01 #256709
by Keithy
Replied by Keithy on topic .dxf Tech Drawing for R7 Gearbox
No it's the bolt circle for the M series engine.....machined a 20mm Al plate and welded that to a lexux 6 sp for one of my projects
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds