× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Lift kit installation, which way round do the springs go?

Start
Prev
1
Next
End

martinjsmith6
Topic Author
Offline
New Member
Registered

03 May 2023 17:38 - 03 May 2023 17:39 #248941 by martinjsmith6

Lift kit installation, which way round do the springs go? was created by martinjsmith6

I fitted a Black raptor 2" lift kit today and I forgot to check which orientation the old springs were before I took them out. I've second guessed it but unsure if I am correct. Can someone tell me which way round they go please?

Front

Rear

Last edit: 03 May 2023 17:39 by martinjsmith6.

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

04 May 2023 03:23 #248947 by Lambert

Replied by Lambert on topic Lift kit installation, which way round do the springs go?

As in which way up? The flatter end goes to the top, the more open coil fits into the seat on the axle. As in left or right? If there's a longer one it goes in the driver side.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.069 seconds

Search

Fast Font

Lift kit installation, which way round do the springs go?

Attachments:

The Legal Stuff