A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
2" Lift
- Sinbadiom
- Topic Author
- New Member
-
Public
- 1066Boy
- New Member
-
Public
13 Aug 2017 09:14 - 13 Aug 2017 09:20 #183370
by 1066Boy
Replied by 1066Boy on topic 2" Lift
not an expert but I do have a 2" lift (spring) The standard brake hoses are fine if you are not removing the anti-roll bar.
The shock spacers will let the suspension droop a little farther before the shock tops out. I only have them on the rear as
when I fitted the springs the anti-roll bar was still on so limiting the front end travel. Its off know.
The shock spacers will let the suspension droop a little farther before the shock tops out. I only have them on the rear as
when I fitted the springs the anti-roll bar was still on so limiting the front end travel. Its off know.
Last edit: 13 Aug 2017 09:20 by 1066Boy. Reason: Photo
Please Log in or Create an account to join the conversation.
- Tom1357
- New Member
-
Public
21 Aug 2017 13:37 - 21 Aug 2017 13:37 #183522
by Tom1357
Replied by Tom1357 on topic 2" Lift
As above, brake lines will be fine unless you remove anti roll bar.
Get shock brackets at the same time.
Front springs on the rear lift the rear by 2inch too
Get shock brackets at the same time.
Front springs on the rear lift the rear by 2inch too
Last edit: 21 Aug 2017 13:37 by Tom1357.
Please Log in or Create an account to join the conversation.
Time to create page: 0.150 seconds