Fear of front locker
- Sandro
- Topic Author
- Visitor
-
Public
i have just bought a 2nd hand jimny, from a friend who downgraded to a Land Rover ...
It's a 2006 vvt, with 2" lift, 215/75 mud and front/rear Arb lockers ...
the old owner scared me telling that he snapped 2 CV joints using the front lockers, and suggested me to be very gentle with it ...
So, as i do not want to break anything, i use the front lockers only at very light gas, and no steering ... there have been times when i could not pass an obstacle with rear lockers only (+ full power) ... but even woth light foot (let say 3000rpm) and 2 lockers i didn't made it ...
I spend already almost more than i could to buy the car, so it's not time to invest in HD axles now ... nor to break the stock ones ...
I would just ask you to collect here a "front locker damages" database, indicating how you snapped yr cv or shafts, just to understand how much i can reasonably push before asking too much to the front axle
Thanks in advance
Please Log in or Create an account to join the conversation.
- Sandro
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 1250
- Thank you received: 116
- Points: 545.00
Jalapeño, IISY?
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Also try only using the locker only when driving straight.
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
maverick wrote: I've never understood the need for a Front Locker - I have a rear Locker and that gets me everywhere i need to go. There are people on BigJimny who have Front Lockers and ARB's - but they tend to be "rich people".
Probably only because you've never tried one
![;) ;)](/media/kunena/emoticons/wink.png)
Please Log in or Create an account to join the conversation.
Just enjoy what you have!
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
If I break something using the ARB lockers I'll be sure to let the OP know how it happened.....I only use 2 karat diamonds as studs in my tyres these days...cutbacks!
Please Log in or Create an account to join the conversation.
- Sandro
- Topic Author
- Visitor
-
Public
![:P :P](/media/kunena/emoticons/tongue.png)
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Sandro wrote: Just found on used market a set of stock CV+joints from a scraped Jimny for only 120€ ... i have now them as spare, so i can try go a little bit harder with no fear of empty (again) the wallet ... seems to be a good compromise between being rich and being under bankruptcy
Just remember that you don't have to buy a lot of used CV's and axles before it's cheaper to udgrade to uprated shafts and CVs instead
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
- Sandro
- Topic Author
- Visitor
-
Public
HD kit + 26spline ARB side gears = how many couples of stock CV+shaft ?
Frankly speaking I think i will ever snap an axle only 1 time ... them i will know which is the kind of force required to break a shaft/cv ... and i will stay away from that ...
I read several discussione about HD shafts/CV and they break too ... just need more abuse ...
I do not want to trash my car, but only to know how much i can push before some thing will give up ... i will learn this by myself eventually ... but if anyone will give me già 1st person experience, i'll be happy and will think twice when i will found a tricky spot where i' ll need 2 lockers on ...
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Sandro wrote: Ok ... but HD shafts needs usually 26 spline diffs ... and my ARB is 22 spline ...
HD kit + 26spline ARB side gears = how many couples of stock CV+shaft ?
Frankly speaking I think i will ever snap an axle only 1 time ... them i will know which is the kind of force required to break a shaft/cv ... and i will stay away from that ...
I read several discussione about HD shafts/CV and they break too ... just need more abuse ...
I do not want to trash my car, but only to know how much i can push before some thing will give up ... i will learn this by myself eventually ... but if anyone will give me già 1st person experience, i'll be happy and will think twice when i will found a tricky spot where i' ll need 2 lockers on ...
Please Log in or Create an account to join the conversation.
- TomDK
- Visitor
-
Public
Sandro wrote: Hi everybody,
i have just bought a 2nd hand jimny, from a friend who downgraded to a Land Rover ...
It's a 2006 vvt, with 2" lift, 215/75 mud and front/rear Arb lockers ...
the old owner scared me telling that he snapped 2 CV joints using the front lockers, and suggested me to be very gentle with it ...
So, as i do not want to break anything, i use the front lockers only at very light gas, and no steering ... there have been times when i could not pass an obstacle with rear lockers only (+ full power) ... but even woth light foot (let say 3000rpm) and 2 lockers i didn't made it ...
I spend already almost more than i could to buy the car, so it's not time to invest in HD axles now ... nor to break the stock ones ...
I would just ask you to collect here a "front locker damages" database, indicating how you snapped yr cv or shafts, just to understand how much i can reasonably push before asking too much to the front axle
Thanks in advance
The whole point of HD shafts and CVS is that they can take more abuse before breaking. So what's your point?
I run 22 splines HD shafts and CVS. They're with 5 year warranty. But not cheap and can take a good deal of abuse compared to standard. I also run with front air locker.
Please Log in or Create an account to join the conversation.