×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Track rod ends
17 Nov 2009 05:11 #1469
by mad4x4
£50 - Ehhhhhh
Anyone do them cheaper
This vehicle is not cheap for SPARES!
Track rod ends was created by mad4x4
£50 - EhhhhhhAnyone do them cheaper
This vehicle is not cheap for SPARES!
Please Log in or Create an account to join the conversation.
17 Nov 2009 05:44 - 17 Nov 2009 05:45 #1471
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Track rod ends
Well Camskill are usually the cheapest around, but the Blueprint parts they sell are supposed to be of a standard which does not invalidate Suzukis warranty.
If you look at places like Demon Tweeks (www.demon-tweeks.co.uk) they do lots of Motorsport ones but these are not listed by model but by size.
Suzuki do them of course - 48820-81A00
I don't know if anyone has fitted Landrover Track Rod ends
to a Jimny but this was certainly an upgrade that people have done on the SJ to toughen it up.
Martin
If you look at places like Demon Tweeks (www.demon-tweeks.co.uk) they do lots of Motorsport ones but these are not listed by model but by size.
Suzuki do them of course - 48820-81A00
I don't know if anyone has fitted Landrover Track Rod ends
to a Jimny but this was certainly an upgrade that people have done on the SJ to toughen it up.Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
17 Nov 2009 10:51 - 26 Nov 2009 10:31 #1475
by mad4x4
Replied by mad4x4 on topic Re:Track rod ends
Ok
Some Part Numbers For Track Rod Ends
Delphi -
TA1996 - Listed as Pass Side Jimny (LH thread)
TA1997 - Listed as Drivers Side Jimny (RH Thread)
Blue Print (from Camskill.com)
ADK88724c* - Listed as RH OUTER TRACK ROD END (LH thread)
ADK88723c** - Listed as LH OUTER TRACK ROD END (RH Thread)
*Note - This one has an inbuilt Grease nipple
**NOTE - This one appears to come with out the nut to hold the taper into the HUB and doesn;t have the grease nipple or greasenipple hole.
I was unlucky and ended up with a 88724c and a ta1996
Some Part Numbers For Track Rod Ends
Delphi -
TA1996 - Listed as Pass Side Jimny (LH thread)
TA1997 - Listed as Drivers Side Jimny (RH Thread)
Blue Print (from Camskill.com)
ADK88724c* - Listed as RH OUTER TRACK ROD END (LH thread)
ADK88723c** - Listed as LH OUTER TRACK ROD END (RH Thread)
*Note - This one has an inbuilt Grease nipple
**NOTE - This one appears to come with out the nut to hold the taper into the HUB and doesn;t have the grease nipple or greasenipple hole.
I was unlucky and ended up with a 88724c and a ta1996
Please Log in or Create an account to join the conversation.
Time to create page: 0.106 seconds