Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Repair or scrap / break
29 Sep 2019 07:50 - 29 Sep 2019 08:05 #213983
by Paul4A
1999 T registered Jimny. Early G13BB SOHC engine.
Replied by Paul4A on topic Repair or scrap / break
It's alive.
I took it to a couple of restorers who came out with outrageous estimates and the garage which has done some work on it in the past offered to take it of my hands to allow their apprentice to train on it, taking the body off the chassis. While undecided on what to do I was advised of a retired person who has repaired huge numbers of land rovers and he's welded it up for us. Not the tidiest of repairs but they're hidden and look solid. I'll have to touch up the rust proofing though as not as good as I'd like. Got it back and it's been MoT'd so its back on the road for winter hooray.
We had thought of buying a replacement but our budget would probably have just bought one with more problems. Now hoping that we can get a few more years out of it. I may treat it to a steel wheel refurbishment (or buy replacements if I can find some good standard ones) as they're getting a bit rusty, Personally I like the look of five spoke alloys but my partner prefers the original steel wheels and its her car.
Paul
I took it to a couple of restorers who came out with outrageous estimates and the garage which has done some work on it in the past offered to take it of my hands to allow their apprentice to train on it, taking the body off the chassis. While undecided on what to do I was advised of a retired person who has repaired huge numbers of land rovers and he's welded it up for us. Not the tidiest of repairs but they're hidden and look solid. I'll have to touch up the rust proofing though as not as good as I'd like. Got it back and it's been MoT'd so its back on the road for winter hooray.
We had thought of buying a replacement but our budget would probably have just bought one with more problems. Now hoping that we can get a few more years out of it. I may treat it to a steel wheel refurbishment (or buy replacements if I can find some good standard ones) as they're getting a bit rusty, Personally I like the look of five spoke alloys but my partner prefers the original steel wheels and its her car.
Paul
1999 T registered Jimny. Early G13BB SOHC engine.
Last edit: 29 Sep 2019 08:05 by Paul4A.
Please Log in or Create an account to join the conversation.
29 Sep 2019 08:57 #213985
by Scimike
Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)
Replied by Scimike on topic Repair or scrap / break
A happy ending.
I was also going to say "get it fixed". It owes you nothing a a good repair in these known rot spots could see another 20 years out of it.
A newer one could be just as rotten and will cost a lot more.
Pump the repair full of wax.
Have fun
Mike
I was also going to say "get it fixed". It owes you nothing a a good repair in these known rot spots could see another 20 years out of it.
A newer one could be just as rotten and will cost a lot more.
Pump the repair full of wax.
Have fun
Mike
Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)
Please Log in or Create an account to join the conversation.
19 May 2020 06:10 #222522
by Paul4A
1999 T registered Jimny. Early G13BB SOHC engine.
Replied by Paul4A on topic Repair or scrap / break
Can anyone kindly advise of the colour code for this metallic blue colour as I'd like to try and get some for some touch up work.
Perhaps listing the range of Suzuki standard colours is something for the Wiki pages?
Also, is there a known standard colour for the steel wheels, as they're not quite silver but as a silvery grey I think. I'd like to keep them a standard colour when repainting?
Many thanks in advance
Paul
Perhaps listing the range of Suzuki standard colours is something for the Wiki pages?
Also, is there a known standard colour for the steel wheels, as they're not quite silver but as a silvery grey I think. I'd like to keep them a standard colour when repainting?
Many thanks in advance
Paul
1999 T registered Jimny. Early G13BB SOHC engine.
Please Log in or Create an account to join the conversation.
19 May 2020 07:14 #222529
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Repair or scrap / break
This is a cool good news story! Well done!
Kirkynut
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- exlkrs
- Visitor
-
Public
20 May 2020 09:24 #222563
by exlkrs
Replied by exlkrs on topic Repair or scrap / break
I've bought one that's very rotten and thought the same, but the great advice and support on here has made me go for it. Good luck!!
Please Log in or Create an account to join the conversation.
- Reason2doubt
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 398
- Thank you received: 100
20 May 2020 13:05 #222571
by Reason2doubt
Replied by Reason2doubt on topic Repair or scrap / break
Interesting read despite it being an older thread; just went through this a few months ago with my own 21 year old Jimny - consequences of two decades of being unkept and some bodged jobs. It failed horrifically this year, but 3 weeks later came through without any advisories. Mainly welding-related - I think it had slipped through just because it had never been to a 'proper' MOT test station who do things thoroughly.
Persevered with the support of forum peeps and here we are; best decision I made keeping it and its gone one to give me hours of joy messing around and improving it in subtle ways.
Persevered with the support of forum peeps and here we are; best decision I made keeping it and its gone one to give me hours of joy messing around and improving it in subtle ways.
The following user(s) said Thank You: sniper
Please Log in or Create an account to join the conversation.
Time to create page: 0.163 seconds