Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Szabi's Jimny

  • Daniel30
  • Visitor
  • Visitor
    Public
24 Sep 2017 14:38 #184425 by Daniel30
Replied by Daniel30 on topic Szabi's Jimny
Nice one, you can cut the plastic off the bit you have cut off to make a skid plate for cosmetic effect ;)

Please Log in or Create an account to join the conversation.

  • jim
  • Visitor
  • Visitor
    Public
24 Sep 2017 14:50 #184426 by jim
Replied by jim on topic Szabi's Jimny
Good Job Szabi.

I should have asked before you started chopping but do you still have the imitation bull bar thingy?

Please Log in or Create an account to join the conversation.

  • Szabek
  • Topic Author
  • Visitor
  • Visitor
    Public
24 Sep 2017 15:28 #184427 by Szabek
Replied by Szabek on topic Szabi's Jimny
Oh Jim, unfortunately the bolts were seized, so after try to getting them out for 30 minutes I lost it, and angle grinder down everything.

I seen one in the Jimny Facebook group.

www.facebook.com/groups/646389752148354/..._id=1391600217627300

But it looks different from mine.

Please Log in or Create an account to join the conversation.

  • 1066Boy
  • Visitor
  • Visitor
    Public
24 Sep 2017 16:35 #184428 by 1066Boy
Replied by 1066Boy on topic Szabi's Jimny
nice work mate. :)

Please Log in or Create an account to join the conversation.

  • Szabek
  • Topic Author
  • Visitor
  • Visitor
    Public
24 Sep 2017 16:47 #184429 by Szabek
Replied by Szabek on topic Szabi's Jimny
Daniel :)

Can I have more info on your front skid plate? :)

Please Log in or Create an account to join the conversation.

  • jim
  • Visitor
  • Visitor
    Public
24 Sep 2017 18:57 #184432 by jim
Replied by jim on topic Szabi's Jimny
Thanks. Ive not seen one like yours, it seems to fit really well. is the one n the FB group the same as yours. I have seen earlier jimny bull bars fitted to later vvt's but they arent a perfect fit.

Szabek wrote: Oh Jim, unfortunately the bolts were seized, so after try to getting them out for 30 minutes I lost it, and angle grinder down everything.

I seen one in the Jimny Facebook group.

www.facebook.com/groups/646389752148354/..._id=1391600217627300

But it looks different from mine.

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
24 Sep 2017 19:21 #184433 by Daniel30
Replied by Daniel30 on topic Szabi's Jimny

Szabek wrote: Daniel :)

Can I have more info on your front skid plate? :)


Hi Szabek
I will take some photos close up tomorrow for you, I haven't got any of the skid plate that would help you out at the moment :)

Please Log in or Create an account to join the conversation.

  • Szabek
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Sep 2017 12:44 - 27 Sep 2017 12:47 #184554 by Szabek
Replied by Szabek on topic Szabi's Jimny
I got fitted the tyres today and they also did the wheel alignment. The pulling left over 20mph tendency disappeared.

Happy, now, stage 1 completed. I can rest for a few more month...weeks... days?!?!?!

Also the wheel cover doesn't fit anymore, I need to get some secure wheel nuts to make sure, nobody going to knick the spare wheel.

Anyone has any spare?


Attachments:
Last edit: 27 Sep 2017 12:47 by Szabek.

Please Log in or Create an account to join the conversation.

More
27 Sep 2017 16:52 #184561 by Riccy
Replied by Riccy on topic Szabi's Jimny
No wheel nuts spare, but i do have a centre cover in grey would cover just the wheel itself (not the tyre)

Jimnybits sell locking nuts in a set of 5 ;-)
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
27 Sep 2017 16:53 #184562 by Riccy
Replied by Riccy on topic Szabi's Jimny
as fitted in this (old) pic...

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
Attachments:
The following user(s) said Thank You: Szabek

Please Log in or Create an account to join the conversation.

More
28 Sep 2017 16:41 #184614 by kirkynut
Replied by kirkynut on topic Szabi's Jimny
You've made a good start on a nice looking Jimny.

I'm glad you're enjoying it so much!

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
The following user(s) said Thank You: Szabek

Please Log in or Create an account to join the conversation.

  • Szabek
  • Topic Author
  • Visitor
  • Visitor
    Public
09 Oct 2017 14:36 #185001 by Szabek
Replied by Szabek on topic Szabi's Jimny
Next project....

While I am still try to deal with the front and rear recovery points and the skid plate to the front, I decided to give a go for the wheel spacers.
I am thinking about the 30-32mm ones (hopefully I can get away with them without trimming). I am calling all wheel spacer gurus and experts for advice. Stud/no stud ?! Any recommendation on specific type/model?

Please Log in or Create an account to join the conversation.

Time to create page: 0.163 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
Accept
View GDPR policy