Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Szabi's Jimny

Riccy
Offline
Banned
Registered
J999 MNY Bashing around Carlisle

06 Sep 2017 17:17 #183913 by Riccy

Replied by Riccy on topic Szabi's Jimny

I used to have 215/75r15 BFG ATs and they were fine until i fitted 30mm spacers, which caused rubbing at the front and back of front arches. back were fine. i would think any offset would probably need some trimming.

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

The following user(s) said Thank You: Szabek

Please Log in or Create an account to join the conversation.

daredevil1234
Visitor
Public

07 Sep 2017 03:20 #183918 by daredevil1234

Replied by daredevil1234 on topic Szabi's Jimny

From what I heard it is not recommended to go beyond -10 on the offset on the rims. 215/75R15can go on but once you start going offroad getting the axle into different angles, it might ruba little on the inside. You can cut a little off the wheelwell cover inside to alleviate the problem. A 2" lift will take care of the problem good enough. BTW, congrats on the purchase, and silver is a great looking color. We can't get silver here anymore sadly.

Please Log in or Create an account to join the conversation.

Szabek
Topic Author
Visitor
Public

07 Sep 2017 04:42 #183919 by Szabek

Replied by Szabek on topic Szabi's Jimny

Thank you for the help guys. Looks like, I am going to go with the -7 and maybe stick with the 205 tyres.

Please Log in or Create an account to join the conversation.

Szabek
Topic Author
Visitor
Public

09 Sep 2017 18:39 #183973 by Szabek

Replied by Szabek on topic Szabi's Jimny

Ok, I need some help again

So, I am gonna get General Grabber AT3-s in 205/75/15 with -7 offset steel rims. I have 2nd ten front bumper, so I need some guidance about trimming (the car will have 2 inch lift). I want to keep my front fog lights. Anyone trimmed this type of bumper? How much do I need to chop off?

Please Log in or Create an account to join the conversation.

1066Boy
Visitor
Public

09 Sep 2017 20:28 #183974 by 1066Boy

Replied by 1066Boy on topic Szabi's Jimny

With a 2" lift probly no trimming necessary.

Please Log in or Create an account to join the conversation.

Szabek
Topic Author
Visitor
Public

12 Sep 2017 12:07 #184050 by Szabek

Replied by Szabek on topic Szabi's Jimny

Postman visited me today.

Thanks for Martin for the speedy action and for the service recommendation.

Also my Rough Country damper unit turned up this morning. Only the wheels/front bumper question have to be sorted and new tyres or wheels need to be ordered.

Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds

Szabi's Jimny

Events Menu