Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
My New Jimny - Introduction
16 Jun 2015 18:01 #146093
by furo
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
My New Jimny - Introduction was created by furo
Hello all,
I've recently become the proud owner of a 2004 Jimny, and I just thought I'd introduce myself!
I have absolutely no mechanical knowledge, but the plan is to slowly modify and improve and learn as I go. The end objective is more of a overlander-type vehicle than a hardcore off-road machine, and my priorities are a box roof rack, interior storage, a steering guard and (once the current tyres wear down) better tyres. Another thing I'm considering is switching the 3-spoke alloys for new steel wheels, but that is purely an aesthetic decision and I'm not sure if it's a wise one.
So far I've just done some basic rust-proofing in the engine bay, boot and on the spare wheel holder and I've installed a fire extinguisher. I've bought a steering guard as well, but I've failed to work out how to attach it so I need to look into that.
Anyway, I'm very happy to have found this forum and I'm looking forward to learning a lot!
I've recently become the proud owner of a 2004 Jimny, and I just thought I'd introduce myself!
I have absolutely no mechanical knowledge, but the plan is to slowly modify and improve and learn as I go. The end objective is more of a overlander-type vehicle than a hardcore off-road machine, and my priorities are a box roof rack, interior storage, a steering guard and (once the current tyres wear down) better tyres. Another thing I'm considering is switching the 3-spoke alloys for new steel wheels, but that is purely an aesthetic decision and I'm not sure if it's a wise one.
So far I've just done some basic rust-proofing in the engine bay, boot and on the spare wheel holder and I've installed a fire extinguisher. I've bought a steering guard as well, but I've failed to work out how to attach it so I need to look into that.
Anyway, I'm very happy to have found this forum and I'm looking forward to learning a lot!
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
Please Log in or Create an account to join the conversation.
16 Jun 2015 18:50 - 16 Jun 2015 19:36 #146095
by X8GGY
Replied by X8GGY on topic My New Jimny - Introduction
Welcome Furo! 
You're in the right place, there's a wealth of jimny knowledge within these forums... I'm still learning myself, and it's a great resource!
Have fun with your Jimny...
Dave
You're in the right place, there's a wealth of jimny knowledge within these forums... I'm still learning myself, and it's a great resource!
Have fun with your Jimny...
Dave
Last edit: 16 Jun 2015 19:36 by X8GGY.
Please Log in or Create an account to join the conversation.
- Daft Waders
- Visitor
-
Public
16 Jun 2015 19:07 #146098
by Daft Waders
Replied by Daft Waders on topic My New Jimny - Introduction
Hi and welcome, looks like we got the same mechanical knowledge :laugh:
But there's guys on here that can strip a jimny to bits :woohoo: and willing to share there knowledge
But there's guys on here that can strip a jimny to bits :woohoo: and willing to share there knowledge
Please Log in or Create an account to join the conversation.
- JimnyGlenn
- Visitor
-
Public
16 Jun 2015 20:11 #146105
by JimnyGlenn
Replied by JimnyGlenn on topic My New Jimny - Introduction
No knowledge here neither! Hello and welcome. Not been here long myself but everyone seems friendly. I'm enjoying it 
Please Log in or Create an account to join the conversation.
- Maze
- Visitor
-
Public
- Daniel30
- Visitor
-
Public
Time to create page: 0.150 seconds