Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Re:Lumberjack Jimny
24 Jan 2023 09:09 - 24 Jan 2023 09:27 #247137
by Busta
Replied by Busta on topic Re:Re:Lumberjack Jimny
I made the "bogies" so they bolt directly the hubs on the trailer axle. No extra springs, they are free to rotate 360 degrees! The balance is exactly the same as when it is in single axle mode.
It takes 15 minutes to swap from single axle to rocking beam. Wheel and mudguard off with 6 bolts, rocking beam on with 4.
And to make it even easier, you can raise the trailer completely clear of the ground by lowering the rear corner stands and then jacking the front with the jockey wheel. So no extra jacks needed!
It takes 15 minutes to swap from single axle to rocking beam. Wheel and mudguard off with 6 bolts, rocking beam on with 4.
And to make it even easier, you can raise the trailer completely clear of the ground by lowering the rear corner stands and then jacking the front with the jockey wheel. So no extra jacks needed!
Last edit: 24 Jan 2023 09:27 by Busta.
Please Log in or Create an account to join the conversation.
24 Jan 2023 11:47 #247145
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic Re:Re:Lumberjack Jimny
That cool, although I don't have a trailer I like it.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
- Roger Fairclough
-
- Offline
- Platinum Member
-
Registered
- lookonimages
- Offline
- Platinum Member
-
Registered
24 Jan 2023 16:28 #247152
by lookonimages
Sent from my SM-A505F using Tapatalk
Replied by lookonimages on topic Re:Re:Re:Lumberjack Jimny
Thank you for explaining the trailer. That one had me thinking. Cool idea. This one I will save for sure.Busta wrote: I made the "bogies" so they bolt directly the hubs on the trailer axle. No extra springs, they are free to rotate 360 degrees! The balance is exactly the same as when it is in single axle mode.
It takes 15 minutes to swap from single axle to rocking beam. Wheel and mudguard off with 6 bolts, rocking beam on with 4.
And to make it even easier, you can raise the trailer completely clear of the ground by lowering the rear corner stands and then jacking the front with the jockey wheel. So no extra jacks needed!
Sent from my SM-A505F using Tapatalk
Please Log in or Create an account to join the conversation.
Time to create page: 0.155 seconds