Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Shima's little gold project
- Shima
- Topic Author
- Visitor
-
Public
30 Jun 2013 18:16 #75583
by Shima
Replied by Shima on topic Shima's little gold project
No eBay APP ID and/or Cert ID defined in Kunena configurationThis is the one i got 
Just remember to rough up the paint so it has a surface to stick on
Just remember to rough up the paint so it has a surface to stick on
Please Log in or Create an account to join the conversation.
- whizz3006
- Visitor
-
Public
- Shima
- Topic Author
- Visitor
-
Public
30 Jun 2013 22:27 #75626
by Shima
Replied by Shima on topic Shima's little gold project
It's the Nato Green and the Matt
I got the 2.5 liter tin and only used 3 quarters of it. That was 3 coats of the stuff.
I got the 2.5 liter tin and only used 3 quarters of it. That was 3 coats of the stuff.
Please Log in or Create an account to join the conversation.
- Shima
- Topic Author
- Visitor
-
Public
03 Jul 2013 22:04 #76022
by Shima
Replied by Shima on topic Shima's little gold project
Got some of the lift on. Still need to put the Panhard rods on and the Radius arms but getting there Slowly.
Once the suspension is all done it will be time for the cutting of the arches and some nice big rubber
Slowly.
Once the suspension is all done it will be time for the cutting of the arches and some nice big rubber
Please Log in or Create an account to join the conversation.
- helijohn
- Visitor
-
Public
05 Jul 2013 22:10 #76244
by helijohn
I'm with you there pal.
Replied by helijohn on topic Re:Shima's little gold project
UKDAN wrote: Looks good in green but I still think gold is the best cover
Dan
I'm with you there pal.
Please Log in or Create an account to join the conversation.
- whizz3006
- Visitor
-
Public
06 Jul 2013 17:19 #76295
by whizz3006
Replied by whizz3006 on topic Shima's little gold project
Looking good Shima!
Oh what I'd give to have access to a workshop like that!
Oh what I'd give to have access to a workshop like that!
Please Log in or Create an account to join the conversation.
- Shima
- Topic Author
- Visitor
-
Public
30 Oct 2013 14:09 #88602
by Shima
Replied by Shima on topic Shima's little gold project
Sorry for the lack of updates in here.
Not had a lot of progress lately due to money issue's but I'm getting there
Panhard arms on
ORA Radius arms and bits4vits polybush bushes
Hoping to get these on tonight
Not had a lot of progress lately due to money issue's but I'm getting there
Panhard arms on
ORA Radius arms and bits4vits polybush bushes
Hoping to get these on tonight
Please Log in or Create an account to join the conversation.
- Shima
- Topic Author
- Visitor
-
Public
07 Nov 2013 18:50 #89822
by Shima
Replied by Shima on topic Shima's little gold project
Got the radius arms and bushes on the other night and got the wheels and 30mm spacers on tonight Cut the rear arches and need to cut the front and the bumpers to get them to fit right but i am getting there now . Can't wait to have it back on the road.
Cut the rear arches and need to cut the front and the bumpers to get them to fit right but i am getting there now . Can't wait to have it back on the road.
Please Log in or Create an account to join the conversation.
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
- Shima
- Topic Author
- Visitor
-
Public
07 Nov 2013 21:38 - 07 Nov 2013 21:39 #89886
by Shima
Replied by Shima on topic Shima's little gold project
Hopefully be ready in the next month or so .
Going to cut the front arches and bumper this weekend then next week is MOT. Get the axle breathers done and a CB installed then i'll be ready for action again.
So close now. It's going to be good just to catch up with you all when we all meet up. Been a long time since i have seen many of you.
Phil
.Going to cut the front arches and bumper this weekend then next week is MOT. Get the axle breathers done and a CB installed then i'll be ready for action again.
So close now. It's going to be good just to catch up with you all when we all meet up. Been a long time since i have seen many of you.
Phil
Last edit: 07 Nov 2013 21:39 by Shima. Reason: Tired = Spelling mistakes
Please Log in or Create an account to join the conversation.
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
- Shima
- Topic Author
- Visitor
-
Public
07 Nov 2013 21:40 #89888
by Shima
Replied by Shima on topic Shima's little gold project
I am indeed 
That was an after Christmas buy haha. It's on the list though need to save up the £500+ to buy one now... 3 months or so that will take me.
That was an after Christmas buy haha. It's on the list though need to save up the £500+ to buy one now... 3 months or so that will take me. Please Log in or Create an account to join the conversation.
Time to create page: 0.179 seconds