Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

renard38's jimny

Obarno
Offline
Platinum Member
Registered

17 Dec 2011 16:30 #28455 by Obarno

Replied by Obarno on topic Re: renard38's jimny

Glad to see there's plenty of snow at last. I think the forecast is also good for the next few days. We are off to Les Coches beginning of January for a few days so hope it lasts!

Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

myers647
Visitor
Public

19 Dec 2011 08:18 #28624 by myers647

Replied by myers647 on topic Re: renard38's jimny

Hi this is in reply to Adamski question. I have fitted a fiat punto 1l front resignator box to replace the Jimny back box it's only about 3" deep x 10" long so it tucks up high out ot the way. All I did was cut the 90* bend off the old box & welded it to the new one so it still looks stock . It's very quiet on tick over apart from a nice deep pure. Then when you put your foot down it has a really nice wrasp. I can get the same box for u for around Ãƒâ€šÃ‚Â£20

Please Log in or Create an account to join the conversation.