Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
My jimny from devon
- r_ogilvy
- Topic Author
- Visitor
-
Public
19 Nov 2011 19:23 #26122
by r_ogilvy
Replied by r_ogilvy on topic Re: My jimny from devon
i have used different pipe for little things and its kinked before, so i wouldnt like to say on stainless.
Please Log in or Create an account to join the conversation.
- supergaz
- Visitor
-
Public
19 Nov 2011 19:26 #26124
by supergaz
Replied by supergaz on topic Re: My jimny from devon
Have you tried the springs that plumbers use? It stops the kinks.
Please Log in or Create an account to join the conversation.
- r_ogilvy
- Topic Author
- Visitor
-
Public
19 Nov 2011 19:36 #26126
by r_ogilvy
Replied by r_ogilvy on topic Re: My jimny from devon
iv never tried them, i use kiln dried sand and keep tapping it down.
would i get away with using 44 mm pipe like the roll cage for a snorkel, or is it to small and starve the engine?
would i get away with using 44 mm pipe like the roll cage for a snorkel, or is it to small and starve the engine?
Please Log in or Create an account to join the conversation.
- Cider
- Visitor
-
Public
19 Nov 2011 20:56 #26137
by Cider
Replied by Cider on topic Re: My jimny from devon
Been around to have a look today and it`s a "proper Job."
Great job done. Rich
Cheers
Pete
Great job done. Rich
Cheers
Pete
Please Log in or Create an account to join the conversation.
- X-Eng Simon
- Visitor
-
Public
19 Nov 2011 21:07 #26140
by X-Eng Simon
Replied by X-Eng Simon on topic Re: My jimny from devon
Martin, I have a 1" former for my JD2 if it's any use?
Si
Si
Please Log in or Create an account to join the conversation.
- r_ogilvy
- Topic Author
- Visitor
-
Public
20 Nov 2011 16:11 #26176
by r_ogilvy
a little more work today took it off so i could weld it fully up.
just need to paint it!
r_ogilvy
Replied by r_ogilvy on topic Re: My jimny from devon
Attachment rollcage2002.jpg not found
Attachment rollcage2001.jpg not found
a little more work today took it off so i could weld it fully up.
just need to paint it!
r_ogilvy
Attachments:
Please Log in or Create an account to join the conversation.
Time to create page: 0.148 seconds