Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Aussie 2006 Jimny - 4" lift, 30" BFGs, cool wheels
- 2014Nathan
- New Member
-
Public
- Goniu
- New Member
-
Public
- zukenutter
- Topic Author
- New Member
-
Public
05 Jun 2014 23:39 - 05 Jun 2014 23:43 #117189
by zukenutter
Replied by zukenutter on topic Aussie 2006 Jimny - 4" lift, 30" BFGs, M18a VVT
Jimny Gearbox.
All the M series motors have the same bell housing pattern, perfect match. I was going to use the heavier 1.8 flywheel but the Jimny clutch and pressure plate has a smaller diameter (mounting holes don't line up) so it didn't match and I had to just use the Jimny flywheel and clutch which is fine anyway.
I couldn't afford a new 1.8 clutch kit
All the M series motors have the same bell housing pattern, perfect match. I was going to use the heavier 1.8 flywheel but the Jimny clutch and pressure plate has a smaller diameter (mounting holes don't line up) so it didn't match and I had to just use the Jimny flywheel and clutch which is fine anyway.
I couldn't afford a new 1.8 clutch kit
Last edit: 05 Jun 2014 23:43 by zukenutter.
Please Log in or Create an account to join the conversation.
- Goniu
- New Member
-
Public
06 Jun 2014 06:38 #117195
by Goniu
Replied by Goniu on topic Aussie 2006 Jimny - 4" lift, 30" BFGs, M18a VVT
Not good... because M18A engine is available only in Australia and New Zealand
You're lucky guy
You're lucky guy
Please Log in or Create an account to join the conversation.
- zukenutter
- Topic Author
- New Member
-
Public
- Goniu
- New Member
-
Public
06 Jun 2014 10:00 #117198
by Goniu
Replied by Goniu on topic Aussie 2006 Jimny - 4" lift, 30" BFGs, M18a VVT
So, i have to move to Australia 
Please Log in or Create an account to join the conversation.
Time to create page: 1.227 seconds