A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
2009 Jimny: Left Stop Light Not Working – No Power at Socket
- avehbiaslanturk
-
Topic Author
- Offline
- Junior Member
-
Registered
Less
More
- Posts: 22
- Thank you received: 2
29 Mar 2025 15:02 #259967
by avehbiaslanturk
Hello everyone,I own a 2009 Jimny and noticed that my left stop light isn’t working. I replaced the bulb, but the new one didn’t light up either. I measured with a multimeter, and when I press the brake, there’s no power coming to the stop light socket. I suspected the fuse, but the other side’s light is working. What could be the problem?
Please Log in or Create an account to join the conversation.
- Rogerzilla
- Offline
- Premium Member
-
Registered
Less
More
- Posts: 127
- Thank you received: 13
29 Mar 2025 16:12 #259968
by Rogerzilla
Replied by Rogerzilla on topic 2009 Jimny: Left Stop Light Not Working – No Power at Socket
It's not unusual for the wiring behind the rear bumper to become damaged.
Please Log in or Create an account to join the conversation.
29 Mar 2025 18:21 #259969
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic 2009 Jimny: Left Stop Light Not Working – No Power at Socket
Have a look behind the left interior panel. When people fit a towbar they break into the wires (often just scotch lock to them. This can damage the wire, or even cut it completely.
Even if you don't have a towbar it doesn't mean there wasn't one before.
Even if you don't have a towbar it doesn't mean there wasn't one before.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there

Please Log in or Create an account to join the conversation.
Time to create page: 0.144 seconds