A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Help buying spare engine
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2966
- Thank you received: 667
18 Jul 2024 18:07 #256833
by jackonlyjack
Replied by jackonlyjack on topic Help buying spare engine
Have you tried allegro.pl
The following user(s) said Thank You: Erik Snow
Please Log in or Create an account to join the conversation.
22 Jul 2024 19:46 #256919
by Erik Snow
Replied by Erik Snow on topic Help buying spare engine
No, I looked now and could only find this:
allegro.pl/oferta/silnik-1-3-16v-g13bb-g...-z-pracy-15770269086
But it doesn't look like the one in my car, air intake över the engine block?
I found this on another site:
www.proxyparts.com/car-parts-stock/infor...ine/partid/20807131/
Only 77000 so hasn't gone as far but don't come from a jimny, is it a problem?
allegro.pl/oferta/silnik-1-3-16v-g13bb-g...-z-pracy-15770269086
But it doesn't look like the one in my car, air intake över the engine block?
I found this on another site:
www.proxyparts.com/car-parts-stock/infor...ine/partid/20807131/
Only 77000 so hasn't gone as far but don't come from a jimny, is it a problem?
Please Log in or Create an account to join the conversation.
22 Jul 2024 22:40 #256921
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Help buying spare engine
Your existing engine will most likely supply all the parts you need to make any g13bb fit your jimny. The most important thing is that the ignition system is the same. With the two coils on the head.
Seems the allegro engine also came out of a front wheel drive transverse mounted something.
Seems the allegro engine also came out of a front wheel drive transverse mounted something.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
The following user(s) said Thank You: Erik Snow
Please Log in or Create an account to join the conversation.
Time to create page: 0.134 seconds