A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Headlight Low / High Beam Switch Wiring under the Combination Switch
Now My issue. Is pretty hard to tell which wire is the one that carries the Low beam toggle signal which is the one I need to toggle in order to finish my project
You can either use a meter to see which wire "goes low" when you select low beam - OR - try my original suggestion - look at the back of the headlight bulb.
By the way, only one of the wires is red, the other one has a white stripe, so one is 'red", and the other is "red with a white stripe", the color of the insulation is used to identify which circuit the wire is a part of.
